Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin

Bekijk alle Motion Sensor ICs
Bulkkorting beschikbaar

Subtotaal (1 rol van 100 eenheden)*

€ 2.587,40

(excl. BTW)

€ 3.130,80

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 18 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per rol*
100 - 100€ 25,874€ 2.587,40
200 +€ 25,534€ 2.553,40

*prijsindicatie

RS-stocknr.:
144-6539
Fabrikantnummer:
SCA3300-D01-1
Fabrikant:
Murata
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Murata

Sensor Type

Accelerometer

Product Type

Sensor

Number of Axis

3

Technology

Capacitive 3D MEMS

Mount Type

Surface

Interface Type

SPI

Maximum Frequency Response

88Hz

Minimum Frequency Response

10Hz

Minimum Supply Voltage

3V

Maximum Supply Voltage

3.6V

Package Type

DFL

Sensitivity

5400LSB/g

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Pin Count

12

Length

8.6mm

Height

3.3mm

Standards/Approvals

No

Width

7 mm

Automotive Standard

No

Land van herkomst:
FI

Accelerometer ICs, Murata


Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata


Gerelateerde Links