Honeywell Through Hole Linear Position Sensor -0.5 V 18V, SIP, 3-Pin

RS-stocknr.:: 169-7650
Fabrikantnummer:: 91SS12-2
Fabrikant:: Honeywell

Honeywell Through Hole Linear Position Sensor -0.5 V 18V, SIP, 3-Pin

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 zak van 1000 eenheden)*

€ 114.342,00

(excl. BTW)

€ 138.354,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 19 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Zak*
1000 - 1000	€ 114,342	€ 114.342,00
2000 +	€ 111,483	€ 111.483,00

*prijsindicatie

RS-stocknr.:: 169-7650
Fabrikantnummer:: 91SS12-2
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Type	Hall Effect Sensors
	Product Type	Linear Position Sensor
	Technology	Analogue
	Mount Type	Through Hole
	Magnetic Type	Linear
	Minimum Supply Voltage	-0.5V
	Maximum Supply Voltage	18V
	Package Type	SIP
	Minimum Operating Temperature	-40°C
	Pin Count	3
	Maximum Operating Temperature	150°C
	Height	0.07mm
	Series	91SS
	Standards/Approvals	RoHS
	Length	7.62mm
	Width	0.6in
	Response Time	3s
	Supply Current	19mA
	Automotive Standard	No

	Alles selecteren
	Merk Honeywell
	Sensor Type Hall Effect Sensors
	Product Type Linear Position Sensor
	Technology Analogue
	Mount Type Through Hole
	Magnetic Type Linear
	Minimum Supply Voltage -0.5V
	Maximum Supply Voltage 18V
	Package Type SIP
	Minimum Operating Temperature -40°C
	Pin Count 3
	Maximum Operating Temperature 150°C
	Height 0.07mm
	Series 91SS
	Standards/Approvals RoHS
	Length 7.62mm
	Width 0.6in
	Response Time 3s
	Supply Current 19mA
	Automotive Standard No

Datasheet

Land van herkomst:: US

Honeywell 91SS Series Linear Position Sensor, 150°C Maximum Operating Temperature, 18V Maximum Supply Voltage - 91SS12-2

This linear position sensor provides analogue magnetic position sensing for industrial control and measurement tasks. It operates over a wide temperature span and is suitable for through-hole PCB mounting where compact, low-power sensing is required. The device is intended for automation, electronics and mechanical systems needing precise linear displacement feedback.

Features and Benefits:

• 3mA supply current reduces overall system power draw
• Response time of 3 s enables measured positional updates
• Operates from -0.5V to 18V supporting low-voltage systems
• Rated to 150°C for use in elevated-temperature environments
• Through-hole SIP package with three pins simplifies PCB assembly
• RoHS conformity facilitates use in regulated industrial installations

Applications

• Suitable for position feedback in factory automation actuators
• Ideal for linear motion measurement in test rigs
• Used with industrial controllers for valve position sensing
• Can be used for displacement monitoring in mechanical assemblies
• Used for sensor integration on PCB-mounted motion modules

What electrical Interface does it require?

It uses an analogue Hall-effect output and draws a steady 19mA supply current for normal operation.

How does the sensor mount to a circuit board?

The device is supplied in a single-inline package designed for through-hole insertion and soldering using three pins.

What magnetic sensing principle is employed?

The unit utilises a linear Hall-effect mechanism to convert magnetic displacement into a proportional analogue signal.

Are there environmental operating limits to consider?

The sensor functions down to -40°C and up to 150°C, which defines its usable thermal range for deployment.