Infineon Surface Hall Effect Sensor 2.8 V 3.5V, I2C, TSOP, 6-Pin

RS-stocknr.:: 193-9558
Fabrikantnummer:: TLE493D-W2B6 A1
Fabrikant:: Infineon

Infineon Surface Hall Effect Sensor 2.8 V 3.5V, I2C, TSOP, 6-Pin

Subtotaal (1 verpakking van 5 eenheden)*

€ 8,10

(excl. BTW)

€ 9,80

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 2.700 stuk(s) vanaf 24 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
5 +	€ 1,62	€ 8,10

*prijsindicatie

RS-stocknr.:: 193-9558
Fabrikantnummer:: TLE493D-W2B6 A1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Sensor Type	Hall Effect
	Product Type	Hall Effect Sensor
	Technology	Digital
	Mount Type	Surface
	Interface Type	I2C
	Maximum Frequency Response	100kHz
	Minimum Frequency Response	5.5kHz
	Minimum Supply Voltage	2.8V
	Package Type	TSOP
	Maximum Supply Voltage	3.5V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Pin Count	6
	Series	TLE493D-W2B6
	Height	1mm
	Standards/Approvals	No
	Width	1.6mm
	Length	2.9mm
	Supply Current	3.4mA
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Sensor Type Hall Effect
	Product Type Hall Effect Sensor
	Technology Digital
	Mount Type Surface
	Interface Type I2C
	Maximum Frequency Response 100kHz
	Minimum Frequency Response 5.5kHz
	Minimum Supply Voltage 2.8V
	Package Type TSOP
	Maximum Supply Voltage 3.5V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Pin Count 6
	Series TLE493D-W2B6
	Height 1mm
	Standards/Approvals No
	Width 1.6mm
	Length 2.9mm
	Supply Current 3.4mA
	Automotive Standard No

Land van herkomst:: MY

Infineon TLE493D-W2B6 Series Hall Effect Sensor, 2.8V Minimum Supply Voltage, 3.5V Maximum Supply Voltage - TLE493D-W2B6 A1

This Hall effect sensor provides digital magnetic-field detection and communicates via an I2C interface for integration on compact electronic assemblies. Designed as a surface-mounted TSOP device with six pins, it is intended for precise positional sensing on PCBs where a low-voltage, low-power digital magnetic position sensor is required.

Features and Benefits:

• Operates from 2.8V to 3.5V offering low-voltage compatibility
• Draws 3.4 mA supply current for energy-conscious designs
• Detects magnetic changes up to 100 kHz for fast response
• Responds reliably above 5.5 kHz for dynamic sensing tasks
• Survives -40 °C to 125 °C for wide temperature operation
• Six-pin TSOP surface-mount enabling compact PCB placement

Applications

• Suitable for I2C magnetic position sensing on compact boards
• Ideal for contactless rotation and encoder interfaces
• Used with battery-powered systems requiring low current draw
• Can be used for high-frequency motion detection tasks
• Suitable for prototype and production PCB-mounted sensors

What interface does it use for communication?

It uses a two-wire I2C bus to transfer digital magnetic-field data.

What mounting method is required for PCB assembly?

The device is a surface-mount TSOP package with six pins designed for reflow soldering.

How does the sensor perform in varying thermal conditions?

It is specified to operate across a temperature span from -40 °C up to 125 °C without affecting basic detection capability.

What electrical constraints should be observed for reliable operation?

Maintain supply voltage within the 2.8 V-3.5V window and account for a steady supply current of approximately 3.4 mA.