Honeywell Surface Hall Effect Sensor -28 V 28V dc, IC, TO-92, 3-Pin

RS-stocknr.:: 203-6319
Artikelnummer Distrelec:: 304-56-877
Fabrikantnummer:: SS451A
Fabrikant:: Honeywell

Honeywell Surface Hall Effect Sensor -28 V 28V dc, IC, TO-92, 3-Pin

Subtotaal (1 zak van 1000 eenheden)*

€ 1.789,00

(excl. BTW)

€ 2.165,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 23 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Zak*
1000 +	€ 1,789	€ 1.789,00

*prijsindicatie

RS-stocknr.:: 203-6319
Artikelnummer Distrelec:: 304-56-877
Fabrikantnummer:: SS451A
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Type	Hall Effect
	Product Type	Hall Effect Sensor
	Technology	Digital
	Mount Type	Surface
	Interface Type	IC
	Magnetic Type	Omnipolar
	Minimum Supply Voltage	-28V
	Maximum Supply Voltage	28V dc
	Package Type	TO-92
	Minimum Operating Temperature	-40°C
	Pin Count	3
	Maximum Operating Temperature	150°C
	Width	1.57mm
	Series	SS400
	Length	4.06mm
	Height	3mm
	Standards/Approvals	RoHS
	Supply Current	20mA
	Automotive Standard	No

	Alles selecteren
	Merk Honeywell
	Sensor Type Hall Effect
	Product Type Hall Effect Sensor
	Technology Digital
	Mount Type Surface
	Interface Type IC
	Magnetic Type Omnipolar
	Minimum Supply Voltage -28V
	Maximum Supply Voltage 28V dc
	Package Type TO-92
	Minimum Operating Temperature -40°C
	Pin Count 3
	Maximum Operating Temperature 150°C
	Width 1.57mm
	Series SS400
	Length 4.06mm
	Height 3mm
	Standards/Approvals RoHS
	Supply Current 20mA
	Automotive Standard No

Datasheet - SS451A

Land van herkomst:: CN

Honeywell SS400 Series Hall Effect Sensor, 28V Maximum Supply Voltage, -40°C Minimum Operating Temperature - SS451A

This hall-effect sensor converts magnetic-field presence into a digital switching signal for use in electronic control and sensing systems. Designed for surface mounting, it operates as an omnipolar magnetic switch that responds to either magnetic polarity and is suited to industrial automation and electronic measurement contexts where a compact, solid-state proximity sensor is required.

Features and Benefits:

• Digital output with 20 mA supply current enabling low-power signalling • Operates from ±28V supply allowing wide voltage compatibility • Temperature tolerance from -40°C to 150°C supporting harsh environments • Omnipolar sensitivity permitting detection of either magnetic polarity • Three-pin surface-mount format facilitating straightforward PCB integration

Applications

• Suitable for magnetic position sensing in actuators and valves • Ideal for contactless speed or rotation detection systems • Used with control electronics in factory automation equipment • Can be used for proximity detection in electrical enclosures

How does it behave when exposed to different magnetic polarities?

It switches its digital output regardless of north or south pole orientation because the sensor responds to magnetic flux of either polarity.

What mounting considerations are required for reliable performance?

It is intended for surface-mount use and should be soldered into a suitable three-pin footprint with appropriate thermal management for high-temperature operation.

How should the supply be applied to avoid damage?

The device accepts supply voltages up to 28V and can tolerate negative supply down to -28 V

ensure system wiring prevents excursions beyond these limits.

Are there environmental restrictions for long-term operation?

It remains operational across a broad temperature span from -40°C to 150°C, so ambient and local heat sources should be assessed to remain within these bounds.