Infineon 2 Axis Surface Inclinometer 3 V 5.5V, SPI, DSO, 8-Pin

RS-stocknr.:: 223-8633
Fabrikantnummer:: TLI5012BE1000XUMA1
Fabrikant:: Infineon

Infineon 2 Axis Surface Inclinometer 3 V 5.5V, SPI, DSO, 8-Pin

Subtotaal (1 rol van 2500 eenheden)*

€ 4.890,00

(excl. BTW)

€ 5.917,50

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 2.500 stuk(s) vanaf 30 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per rol*
2500 +	€ 1,956	€ 4.890,00

*prijsindicatie

RS-stocknr.:: 223-8633
Fabrikantnummer:: TLI5012BE1000XUMA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Sensor Type	Hall Effect
	Product Type	Inclinometer
	Number of Axis	2
	Technology	Digital
	Mount Type	Surface
	Interface Type	SPI
	Minimum Supply Voltage	3V
	Maximum Supply Voltage	5.5V
	Package Type	DSO
	Minimum Operating Temperature	-40°C
	Pin Count	8
	Maximum Operating Temperature	105°C
	Height	1.75mm
	Length	5.02mm
	Width	4.82mm
	Standards/Approvals	RoHS
	Series	TLI5012B E1000
	Automotive Standard	No
	Supply Current	14mA

	Alles selecteren
	Merk Infineon
	Sensor Type Hall Effect
	Product Type Inclinometer
	Number of Axis 2
	Technology Digital
	Mount Type Surface
	Interface Type SPI
	Minimum Supply Voltage 3V
	Maximum Supply Voltage 5.5V
	Package Type DSO
	Minimum Operating Temperature -40°C
	Pin Count 8
	Maximum Operating Temperature 105°C
	Height 1.75mm
	Length 5.02mm
	Width 4.82mm
	Standards/Approvals RoHS
	Series TLI5012B E1000
	Automotive Standard No
	Supply Current 14mA

Datasheet - TLI5012BE1000XUMA1

Infineon TLI5012B E1000 Series Inclinometer, 2 Axis, 3-5.5V Supply Voltage - TLI5012BE1000XUMA1

This inclinometer provides digital two-axis tilt measurement for embedded systems, offering a Compact surface-mount solution with an SPI interface. Designed for applications requiring precise angular sensing, it operates across a wide temperature range and draws modest supply current while communicating over a standard serial peripheral interface.

Features and Benefits:

• 2-axis Hall-effect sensing for simultaneous dual-plane measurement
• SPI Interface supports fast digital data readout
• Operates from 3V to 5.5V for flexible power arrangements
• 14mA supply current for reduced power consumption
• RoHS-compliant construction for restricted-substance adherence
• Wide ambient range from -40°C to 105°C for harsh environments

Applications

• Suitable for industrial tilt monitoring systems requiring digital output
• Ideal for battery-powered devices needing low-power tilt sensing
• Used with motor-control units requiring angle feedback via SPI
• Can be used for orientation detection in portable instrumentation
• Suitable for retrofit designs needing a Compact surface-mount sensor

What package and pin count should designers account for on the PCB?

The device is supplied in a DSO package with eight pins to route SPI, power and ground connections.

Which sensing technology underpins the angle measurement?

It uses a Hall-effect sensor array to produce digital angular information across two axes.

What are the limits for the supply voltage when integrating it?

The acceptable supply range spans from 3V up to a maximum of 5.5V.

How does the sensor perform in extreme temperature conditions?

It is specified to operate continuously between -40°C and 105°C.

Are there any standards-related attributes relevant to manufacturing?

The unit is declared RoHS compliant, indicating adherence to restricted-substance requirements.