Honeywell Technologies Hall Effect Sensor 4.5 V 10.5V, TO-92, 3-Pin
- RS-stocknr.:
- 236-2758
- Fabrikantnummer:
- SS495B
- Fabrikant:
- Honeywell
Subtotaal (1 zak van 1000 eenheden)*
€ 6.468,00
(excl. BTW)
€ 7.826,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 04 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Zak* |
|---|---|---|
| 1000 + | € 6,468 | € 6.468,00 |
*prijsindicatie
- RS-stocknr.:
- 236-2758
- Fabrikantnummer:
- SS495B
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Hall Effect | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | TO-92 | |
| Maximum Supply Voltage | 10.5V | |
| Sensitivity | 3% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Series | SS490 | |
| Height | 1.7mm | |
| Standards/Approvals | No | |
| Length | 4.06mm | |
| Width | 3mm | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Response Time | 3μs | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Hall Effect | ||
Minimum Supply Voltage 4.5V | ||
Package Type TO-92 | ||
Maximum Supply Voltage 10.5V | ||
Sensitivity 3% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Series SS490 | ||
Height 1.7mm | ||
Standards/Approvals No | ||
Length 4.06mm | ||
Width 3mm | ||
Automotive Standard No | ||
Supply Current 7mA | ||
Response Time 3μs | ||
- Land van herkomst:
- CN
Honeywell SS490 Series Hall Effect Sensor, 3-Pin Pin Count, 4.5V Minimum Supply Voltage - SS495B
This Hall effect sensor converts magnetic field presence into an electrical signal for sensing applications across electronic systems. It operates from low supply voltages and functions reliably across a wide temperature range, making it suitable for Compact installations where fast magnetic detection is required. The device is supplied in a through-hole TO-92 package and presents a simple 3-pin Interface for integration into control and monitoring circuits.
Features and Benefits:
• 3 μs response time enables Rapid magnetic event detection
• 7 mA supply current minimises power draw in continuous operation
• 4.5 V minimum supply voltage supports low-voltage designs
• 150°C maximum temperature rating allows high-temperature use
• 3% sensitivity delivers consistent detection accuracy
• 7 mA supply current minimises power draw in continuous operation
• 4.5 V minimum supply voltage supports low-voltage designs
• 150°C maximum temperature rating allows high-temperature use
• 3% sensitivity delivers consistent detection accuracy
Applications
• Suitable for position sensing in small actuators
• Ideal for non-contact switch replacement in control panels
• Used for rotor or shaft monitoring in low-voltage drives
• Can be used for proximity detection in Compact assemblies
• Appropriate for magnetic field sensing in test rigs
• Ideal for non-contact switch replacement in control panels
• Used for rotor or shaft monitoring in low-voltage drives
• Can be used for proximity detection in Compact assemblies
• Appropriate for magnetic field sensing in test rigs
What package type does it use for PCB mounting?
It is supplied in a TO-92 through-hole package suitable for straightforward insertion and soldering.
How many electrical connections are required to operate it?
It requires a 3-pin connection comprising supply, ground and output.
What operating temperature extremes can it tolerate?
It operates from -40°C up to 150°C for use in elevated temperature environments.
How sensitive is the sensor to magnetic changes?
It has a sensitivity specified at 3% for repeatable magnetic detection.
What magnetic characteristic is specified for compatibility?
The device is defined with a magnetic type Value of 4.10 to guide selection with magnets and field strengths.
Gerelateerde Links
- Honeywell Technologies 1 Axis Through Hole Hall Effect Sensor 4.5 V 10.5V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 4.5 V 10.5V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor -4.5 V 10.5V TO-92, 3-Pin
- Honeywell Technologies 3 Axis Through Hole Hall Effect Sensor 4 V 24V 3-Pin
- Honeywell Technologies Hall Effect Sensor Surface Block Body, 10.5 V dc 10.5V
- Honeywell Technologies Through Hole Hall Effect Sensor 4.5 V 24V TO-92, 3-Pin
- Honeywell Technologies Hall Effect Sensor Surface Flat Body, 10.5 V dc 10.5V dc
- Honeywell Technologies Hall Effect Sensor Surface Flat Body, 11 V dc 10.5V dc
