Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5V, IC, TO-92, 3-Pin

RS-stocknr.:: 236-2761P
Fabrikantnummer:: SS49E
Fabrikant:: Honeywell

Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5V, IC, TO-92, 3-Pin

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal 50 eenheden (geleverd in een zak)*

€ 196,00

(excl. BTW)

€ 237,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

290 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 1.000 stuk(s) vanaf 28 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
50 - 95	€ 3,92
100 +	€ 3,83

*prijsindicatie

RS-stocknr.:: 236-2761P
Fabrikantnummer:: SS49E
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Type	Hall Effect
	Product Type	Hall Effect Sensor
	Technology	Hall Effect
	Mount Type	Through Hole
	Magnetic Type	Linear
	Interface Type	IC
	Minimum Supply Voltage	2.7V
	Package Type	TO-92
	Maximum Supply Voltage	6.5V
	Minimum Operating Temperature	-40°C
	Sensitivity	25%
	Maximum Operating Temperature	100°C
	Pin Count	3
	Width	3mm
	Length	4.06mm
	Height	1.7mm
	Standards/Approvals	No
	Series	SS49E
	Automotive Standard	No
	Response Time	3s
	Supply Current	6mA

	Alles selecteren
	Merk Honeywell
	Sensor Type Hall Effect
	Product Type Hall Effect Sensor
	Technology Hall Effect
	Mount Type Through Hole
	Magnetic Type Linear
	Interface Type IC
	Minimum Supply Voltage 2.7V
	Package Type TO-92
	Maximum Supply Voltage 6.5V
	Minimum Operating Temperature -40°C
	Sensitivity 25%
	Maximum Operating Temperature 100°C
	Pin Count 3
	Width 3mm
	Length 4.06mm
	Height 1.7mm
	Standards/Approvals No
	Series SS49E
	Automotive Standard No
	Response Time 3s
	Supply Current 6mA

Land van herkomst:: CN

Honeywell SS49E Series Hall Effect Sensor, 2.7V Minimum Supply Voltage, 6.5V Maximum Supply Voltage - SS49E

This Hall effect sensor is a three-pin linear magnetic IC supplied in a TO-92 through-hole package, designed to convert magnetic field variations into an electrical signal for electronic and automation systems. It operates across a modest supply range and is intended for incorporation into circuit designs where compact, interface-ready sensing is required.

Features and Benefits:

• Operates from 2.7V to 6.5V enabling flexible power arrangements • Low supply current of 6 mA minimises system power draw • Linear output response time of 3 s supports steady-state measurements • Sensitive to magnetic field changes with 25% sensitivity for responsive detection • Wide ambient range from -40 °C to 100 °C suits varied environmental conditions

Applications

• Suitable for position sensing in linear actuators and slides • Ideal for current sensing in power-control circuits • Used with motion-detection systems in factory automation • Can be used for proximity detection in mechanical assemblies

What mounting method is required for integration into a prototype board?

It uses a through-hole mounting style compatible with standard drilled boards and hand-solder assembly, simplifying mechanical securing and connection.

How Compact is the component for dense board layouts?

The package footprint is small with a body width of around 3mm and length close to 4.06mm, allowing placement in tight spaces between other components.

What Interface type does it present to system electronics?

The device is an IC-type Interface requiring three electrical connections for supply, ground and output, which suits straightforward analogue or digital conditioning stages.

What technology underpins the sensing mechanism?

It employs Hall-effect technology to produce an electrical signal proportional to the applied magnetic field, enabling linear magnetic field measurements.