STMicroelectronics 3 Axis Surface Accelerometer 1.71 V 2.1V, I2C, TDM, LGA-14L, 14-Pin
- RS-stocknr.:
- 252-3648P
- Fabrikantnummer:
- AIS25BATR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 63,60
(excl. BTW)
€ 77,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 68 stuk(s) vanaf 18 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 99 | € 6,36 |
| 100 - 249 | € 6,22 |
| 250 - 499 | € 6,10 |
| 500 + | € 5,98 |
*prijsindicatie
- RS-stocknr.:
- 252-3648P
- Fabrikantnummer:
- AIS25BATR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Accelerometer | |
| Sensor Type | Accelerometer | |
| Number of Axis | 3 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | I2C, TDM | |
| Minimum Supply Voltage | 1.71V | |
| Package Type | LGA-14L | |
| Maximum Supply Voltage | 2.1V | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 0.12mg/LSB | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 14 | |
| Height | 0.86mm | |
| Length | 2.5mm | |
| Standards/Approvals | RoHS | |
| Series | AIS25BA | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Accelerometer | ||
Sensor Type Accelerometer | ||
Number of Axis 3 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type I2C, TDM | ||
Minimum Supply Voltage 1.71V | ||
Package Type LGA-14L | ||
Maximum Supply Voltage 2.1V | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 0.12mg/LSB | ||
Maximum Operating Temperature 125°C | ||
Pin Count 14 | ||
Height 0.86mm | ||
Length 2.5mm | ||
Standards/Approvals RoHS | ||
Series AIS25BA | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics MEMS digital output motion sensor: low noise, high bandwidth, 3-axis accelerometer with TDM interface is an ultralow noise, low latency, wide bandwidth, 3-axis digital accelerometer with a dedicated TDM interface designed to address automotive non-safety applications, in particular, wideband active noise control (ANC) and vibration monitoring. The AIS25BA has a user-selectable full-scale range of ±3.85/±7.7 g, a time-division multiplexing (TDM) interface for the sensor data, and an I²C interface for device configuration.
The AIS25BA is available in a small thin plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +125 °C.
3-axis accelerometer with user-selectable full-scale is ±3.85/±7.7 g
Wide and flat frequency response is from dc up to 2.4 kHz (typ)
Low latency (entire reading chain) is 266 μs @ 2 kHz (typ)
Ultralow noise density (typ: 30 μg/√Hz for X and Y axes; 50 μg/√Hz for Z-axis)
TDM (8/16/24 kHz) slave interface for sensor data and I²C interface for configuration
Supply voltage is 1.71 V to 2.1 V
Extended temperature range from -40 °C to +125 °C
Embedded self-test