Infineon Surface Hall Effect Sensor 2.4 V 5.5V, SC-59, 3-Pin

RS-stocknr.:: 753-3260
Artikelnummer Distrelec:: 304-45-322
Fabrikantnummer:: TLE4913HTSA1
Fabrikant:: Infineon

Infineon Surface Hall Effect Sensor 2.4 V 5.5V, SC-59, 3-Pin

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 5 eenheden)*

€ 1,74

(excl. BTW)

€ 2,105

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 11 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
5 - 45	€ 0,348	€ 1,74
50 - 120	€ 0,342	€ 1,71
125 - 245	€ 0,336	€ 1,68
250 - 495	€ 0,326	€ 1,63
500 +	€ 0,324	€ 1,62

*prijsindicatie

RS-stocknr.:: 753-3260
Artikelnummer Distrelec:: 304-45-322
Fabrikantnummer:: TLE4913HTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	Hall Effect Sensor
	Sensor Type	Hall Effect Sensors
	Technology	Chopper Technique, CMOS
	Mount Type	Surface
	Magnetic Type	Omnipolar
	Minimum Supply Voltage	2.4V
	Package Type	SC-59
	Maximum Supply Voltage	5.5V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Pin Count	3
	Series	TLE4913
	Width	1.6mm
	Standards/Approvals	Mil. Std. 883D Method 3015.7, EOS/ESD Association Standard S5.1-1993
	Height	1.1mm
	Length	3mm
	Response Time	93μs
	Supply Current	20μA

	Alles selecteren
	Merk Infineon
	Product Type Hall Effect Sensor
	Sensor Type Hall Effect Sensors
	Technology Chopper Technique, CMOS
	Mount Type Surface
	Magnetic Type Omnipolar
	Minimum Supply Voltage 2.4V
	Package Type SC-59
	Maximum Supply Voltage 5.5V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Pin Count 3
	Series TLE4913
	Width 1.6mm
	Standards/Approvals Mil. Std. 883D Method 3015.7, EOS/ESD Association Standard S5.1-1993
	Height 1.1mm
	Length 3mm
	Response Time 93μs
	Supply Current 20μA

Datasheet

Infineon TLE4913 Series Hall Effect Sensor, 2.4V Minimum Supply Voltage, 5.5V Maximum Supply Voltage - TLE4913HTSA1

This Hall effect sensor provides contactless magnetic detection for compact surface-mounted electronics. It operates from low-voltage supplies and detects omnipolar magnetic fields while consuming minimal current, making it suitable for embedded sensing in constrained-power designs and environments requiring a small footprint.

Features and Benefits:

• Operates from 2.4 V-5.5V enabling flexible supply-voltage choices
• Consumes 20 μA to extend battery or low-power system runtime
• Responds within 93 μs for rapid magnetic-event detection
• Omnipolar sensing simplifies alignment for bidirectional fields
• Chopper CMOS architecture reduces offset and drift during measurement

Applications

• Suitable for battery-powered position sensing in portable devices
• Ideal for reed switch replacement in compact assemblies
• Used with microcontrollers for contactless rotary position feedback
• Can be used for switch detection in industrial control panels
• Suitable for small-scale flow or proximity sensing modules

What package type should I account for in PCB layout?

It arrives in a miniature SC-59 surface-mount package with three pins for straightforward SMD assembly and solder-reflow processing.

How does it behave across temperature extremes?

The device maintains operation from -40 °C up to 85 °C, allowing use in a wide range of ambient conditions.

Are there any specific robustness standards met for handling and testing?

It conforms to MIL‑STD‑883D Method 3015.7 and EOS/ESD Association Standard S5.1-1993 for electrostatic and mechanical handling assessments.

What magnetic polarity is required for activation?

Detection is omnipolar so either magnetic polarity will trigger sensing without the need for orientation-specific placement.