McLennan Operator Panel
- RS-stocknr.:
- 255-9087
- Fabrikantnummer:
- MSB563
- Fabrikant:
- McLennan Servo Supplies
Bulkkorting beschikbaar
Prijs Per stuk**
€ 242,35
(excl. BTW)
€ 293,24
(incl. BTW)
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-01-2025, met een levertijd van 2 à 3 werkdagen.*
* Bezorgdata kunnen veranderen afhankelijk van de gekozen hoeveelheid en het bezorgadres.
GRATIS bezorging voor bestellingen vanaf € 75,00
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 242,35 |
| 5 - 9 | € 235,08 |
| 10 + | € 225,40 |
**prijsindicatie
- RS-stocknr.:
- 255-9087
- Fabrikantnummer:
- MSB563
- Fabrikant:
- McLennan Servo Supplies
Back Plane and Power Supply
The stepper drive system back plane allows the stepper drive power supply to be readily connected to two of the bipolar stepper drive cards and the programmable 2 axis control board. Connection is without the need to use a soldering iron enabling a complete system to be constructed in a minimum of time.
The nature of construction of the back plane and power supply enable a very flexible single or 2 axis system to be produced. Only the 3.5A bipolar drive board is compatible with the back plane. The drives can be fed with external control signals or, by the addition of the programmable 2 axis control card a stand alone system can be produced catering for many applications.
The whole system can be built into a standard 19in. wide by 3U high Euro Rack.
All connections are made via screw terminals to the rear of the back plane.
Suitable 19in. rack parts (as shown), that may be required for enclosing the drive systems are listed in the Enclosures section and have to be ordered separately.
The nature of construction of the back plane and power supply enable a very flexible single or 2 axis system to be produced. Only the 3.5A bipolar drive board is compatible with the back plane. The drives can be fed with external control signals or, by the addition of the programmable 2 axis control card a stand alone system can be produced catering for many applications.
The whole system can be built into a standard 19in. wide by 3U high Euro Rack.
All connections are made via screw terminals to the rear of the back plane.
Suitable 19in. rack parts (as shown), that may be required for enclosing the drive systems are listed in the Enclosures section and have to be ordered separately.
