STMicroelectronics L6506D013TR, Stepper Motor Motor Controller 20-Pin, SO-20
- RS-stocknr.:
- 151-483
- Fabrikantnummer:
- L6506D013TR
- Fabrikant:
- STMicroelectronics
Subtotaal (1 rol van 1000 eenheden)*
€ 2.355,00
(excl. BTW)
€ 2.850,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 1000 + | € 2,355 | € 2.355,00 |
*prijsindicatie
- RS-stocknr.:
- 151-483
- Fabrikantnummer:
- L6506D013TR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Motor Controller | |
| Motor Type | Stepper Motor | |
| Configuration | Dual Bridge | |
| Mount Type | Surface | |
| Package Type | SO-20 | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 7V | |
| Typical Switching Frequency | 70kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 13mm | |
| Series | L6506 | |
| Height | 2.65mm | |
| Standards/Approvals | RoHS | |
| Supply Current | 10mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Motor Controller | ||
Motor Type Stepper Motor | ||
Configuration Dual Bridge | ||
Mount Type Surface | ||
Package Type SO-20 | ||
Pin Count 20 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 7V | ||
Typical Switching Frequency 70kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 13mm | ||
Series L6506 | ||
Height 2.65mm | ||
Standards/Approvals RoHS | ||
Supply Current 10mA | ||
Automotive Standard No | ||
The STMicroelectronics Current controller designed to sense and control the current in stepping motors and similar devices. When used in conjunction with the L293, L298, L7150, L6114/L6115, the chip set forms a constant current drive for an inductive load and performs all the Interface function from the control logic through the power stage.
Supply Voltage is 10V
Junction Temperature is 150 °C