STMicroelectronics L99H92QF-TR, DC Motor Motor Driver IC 32-Pin, TQFP-32
- RS-stocknr.:
- 151-692
- Fabrikantnummer:
- L99H92QF-TR
- Fabrikant:
- STMicroelectronics
Subtotaal (1 rol van 2400 eenheden)*
€ 4.905,60
(excl. BTW)
€ 5.935,20
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2400 + | € 2,044 | € 4.905,60 |
*prijsindicatie
- RS-stocknr.:
- 151-692
- Fabrikantnummer:
- L99H92QF-TR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Motor Type | DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Dual Half Bridge | |
| Mount Type | Surface | |
| Package Type | TQFP-32 | |
| Pin Count | 32 | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | 4.51V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 50kHz | |
| Maximum Operating Temperature | 150°C | |
| Length | 7mm | |
| Series | L99H92 | |
| Standards/Approvals | RoHS | |
| Supply Current | 10mA | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Motor Type DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Dual Half Bridge | ||
Mount Type Surface | ||
Package Type TQFP-32 | ||
Pin Count 32 | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage 4.51V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 50kHz | ||
Maximum Operating Temperature 150°C | ||
Length 7mm | ||
Series L99H92 | ||
Standards/Approvals RoHS | ||
Supply Current 10mA | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics device is designed to drive 4 external N-channel MOSFET transistors in single H-bridge or dual independent half bridge configuration for DC-motor control in automotive applications. Two free configurable current sense amplifiers are integrated. The device has a low power mode (standby mode) where the current consumption is less than 5 μA.
AEC-Q100 qualified
RoHs compliant device
Programmable diagnostic output
Low quiescent current
Support for random HW faults up to ASIL B