ROHM BD62120JEFJ-E2, Brushless Motor Driver IC 8-Pin, HTSOP-J8
- RS-stocknr.:
- 264-583P
- Fabrikantnummer:
- BD62120JEFJ-E2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 79,80
(excl. BTW)
€ 96,55
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 135 stuk(s) vanaf 24 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,596 |
| 100 - 495 | € 1,478 |
| 500 - 995 | € 1,36 |
| 1000 + | € 1,312 |
*prijsindicatie
- RS-stocknr.:
- 264-583P
- Fabrikantnummer:
- BD62120JEFJ-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | Motor Driver IC | |
| Motor Type | Brushless | |
| Configuration | Circular | |
| Mount Type | Surface | |
| Package Type | HTSOP-J8 | |
| Pin Count | 8 | |
| Output Current | 2A | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -25°C | |
| Typical Switching Frequency | 100kHz | |
| Maximum Operating Temperature | 85°C | |
| Height | 1mm | |
| Series | BD62120 | |
| Length | 6mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Supply Current | 2.5mA | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type Motor Driver IC | ||
Motor Type Brushless | ||
Configuration Circular | ||
Mount Type Surface | ||
Package Type HTSOP-J8 | ||
Pin Count 8 | ||
Output Current 2A | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -25°C | ||
Typical Switching Frequency 100kHz | ||
Maximum Operating Temperature 85°C | ||
Height 1mm | ||
Series BD62120 | ||
Length 6mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Supply Current 2.5mA | ||
The ROHM 36V 1-channel DC brush motor driver features a built-in H-bridge design and the driver can facilitate low power consumption by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation contributes to set high reliability. This IC uses different production line against series model for the purpose of improving production efficiency. We recommend using this IC for your new development. Electric characteristics noted in Datasheet does not differ between Production Line. In addition, the data is disclosed for documents and design models unless otherwise specified.
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit
Over-current Protection Circuit
Under Voltage Lock out Circuit
Over Voltage Lock out Circuit