STMicroelectronics, Stepper Motor Driver IC 16-Pin, QFN
- RS-stocknr.:
- 163-9749P
- Fabrikantnummer:
- STSPIN220
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 57,30
(excl. BTW)
€ 69,325
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 2.790 stuk(s) vanaf 15 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 - 45 | € 2,292 |
| 50 - 120 | € 2,062 |
| 125 - 245 | € 1,858 |
| 250 + | € 1,802 |
*prijsindicatie
- RS-stocknr.:
- 163-9749P
- Fabrikantnummer:
- STSPIN220
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Output Current | 1.3A | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 10V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 3.15mm | |
| Series | STSPIN | |
| Standards/Approvals | No | |
| Height | 0.98mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type QFN | ||
Output Current 1.3A | ||
Pin Count 16 | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 10V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 3.15mm | ||
Series STSPIN | ||
Standards/Approvals No | ||
Height 0.98mm | ||
Automotive Standard No | ||
The STSPIN220 is a stepper motor driver which integrates, in a small QFN 3 x 3 mm package, both control logic and a low RDS(on) power stage. The integrated controller implements PWM current control with fixed OFF time and a microstepping resolution up to 1/256th of a step. The device is designed to operate in battery-powered scenarios and can be forced into a zero-consumption state, allowing a significant increase in battery life. The device offers a complete set of protection features including overcurrent, overtemperature and short-circuit protection
Operating voltage:from 1.8 to 10 V
Maximum output current:1.3 Arms
RDS(on) HS + LS = 0.4 Ω typ
Microstepping up to 1/256th of a step
Current control with programmable off-time
Full protection set
Non-dissipative overcurrent protection
Short-circuit protection
Thermal shutdown
Energy saving and long battery life with standby consumption less than 80 nA