STMicroelectronics, DC Motor Motor Driver IC 36-Pin, PSSO
- RS-stocknr.:
- 164-7011P
- Fabrikantnummer:
- VNH7040AYTR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 38,40
(excl. BTW)
€ 46,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 970 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 24 | € 3,84 |
| 25 - 99 | € 3,79 |
| 100 - 249 | € 3,74 |
| 250 + | € 3,70 |
*prijsindicatie
- RS-stocknr.:
- 164-7011P
- Fabrikantnummer:
- VNH7040AYTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | PSSO | |
| Output Current | 35A | |
| Pin Count | 36 | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | 4V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 20kHz | |
| Maximum Operating Temperature | 150°C | |
| Series | VNH | |
| Width | 7.6mm | |
| Height | 2.4mm | |
| Standards/Approvals | No | |
| Length | 10.5mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 6mA | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type PSSO | ||
Output Current 35A | ||
Pin Count 36 | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage 4V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 20kHz | ||
Maximum Operating Temperature 150°C | ||
Series VNH | ||
Width 7.6mm | ||
Height 2.4mm | ||
Standards/Approvals No | ||
Length 10.5mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 6mA | ||
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. All switches are designed using STMicroelectronics® well known and proven proprietary VIPower® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dice are assembled in a PowerSSO-36 package equipped with three exposed islands for optimized dissipation performances. This package is specifically designed for the harsh automotive environment and offers improved thermal performance thanks to exposed die pads.
Output current: 35 A
3 V CMOS compatible inputs
Undervoltage shutdown
Overvoltage clamp
Thermal shutdown
Cross-conduction protection
Current and power limitation
Very low standby power consumption
Protection against loss of ground and loss of VCC