Power Integrations, AC, Brushless DC Motor Motor Driver IC 24-Pin, InSOP-C
- RS-stocknr.:
- 187-5422P
- Fabrikantnummer:
- BRD1165C-TL
- Fabrikant:
- Power Integrations
Ontvang bulkkorting
Voeg 100 meer toe om € 9,00 te besparen
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 16,88
(excl. BTW)
€ 20,42
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 4.195 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 10 - 95 | € 1,688 | - |
| 100 - 495 | € 1,598 | € 9,00 |
| 500 - 995 | € 1,562 | € 63,00 |
| 1000 + | € 1,492 | € 196,00 |
*prijsindicatie
- RS-stocknr.:
- 187-5422P
- Fabrikantnummer:
- BRD1165C-TL
- Fabrikant:
- Power Integrations
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Power Integrations | |
| Product Type | Motor Driver IC | |
| Motor Type | AC, Brushless DC Motor | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | InSOP-C | |
| Output Current | 3A | |
| Pin Count | 24 | |
| Minimum Supply Voltage | -15V | |
| Maximum Supply Voltage | 600V | |
| Typical Switching Frequency | 20kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.45mm | |
| Length | 9.4mm | |
| Series | BRD | |
| Width | 10.8mm | |
| Standards/Approvals | No | |
| Inverter Power Rating | 400W | |
| Automotive Standard | No | |
| Supply Current | 12mA | |
| Alles selecteren | ||
|---|---|---|
Merk Power Integrations | ||
Product Type Motor Driver IC | ||
Motor Type AC, Brushless DC Motor | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type InSOP-C | ||
Output Current 3A | ||
Pin Count 24 | ||
Minimum Supply Voltage -15V | ||
Maximum Supply Voltage 600V | ||
Typical Switching Frequency 20kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.45mm | ||
Length 9.4mm | ||
Series BRD | ||
Width 10.8mm | ||
Standards/Approvals No | ||
Inverter Power Rating 400W | ||
Automotive Standard No | ||
Supply Current 12mA | ||
- Land van herkomst:
- TH
Highest Performance and Design Flexibility
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation
Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners