onsemi, Stepper Motor Driver IC 24-Pin, SSOP
- RS-stocknr.:
- 189-0248
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Subtotaal (1 rol van 2500 eenheden)*
€ 2.897,50
(excl. BTW)
€ 3.505,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Laatste voorraad RS
- Laatste 2.500 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 1,159 | € 2.897,50 |
*prijsindicatie
- RS-stocknr.:
- 189-0248
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Output Current | 1.3A | |
| Pin Count | 24 | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 5MHz | |
| Maximum Operating Temperature | 150°C | |
| Series | NCV7750 | |
| Standards/Approvals | Pb-Free | |
| Width | 3.9mm | |
| Height | 1.5mm | |
| Length | 8.65mm | |
| Inverter Power Rating | 100mW | |
| Supply Current | 3mA | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Mount Type Surface | ||
Package Type SSOP | ||
Output Current 1.3A | ||
Pin Count 24 | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 5MHz | ||
Maximum Operating Temperature 150°C | ||
Series NCV7750 | ||
Standards/Approvals Pb-Free | ||
Width 3.9mm | ||
Height 1.5mm | ||
Length 8.65mm | ||
Inverter Power Rating 100mW | ||
Supply Current 3mA | ||
Automotive Standard AEC-Q100 | ||
Power Up without Open Circuit Detection
Low Quiescent Current
16 bit SPI control
Limp Home Functionality
3.3V and 5V compatible Digital Input Supply Range
Fault Reporting of Open Load, Over Load, and Over Temperature
Power On Reset
Uniform output structure of all outputs on one side of the package.
4 Channels
600 mA Low-Side Drivers
Parallel Input Pins
Allows for power up without LED load illumination.
Able to report errors and is capable of daisy chain connections.
Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.
Suitable for both 3.3V and 5V micro processor interfaces.
The micro processor and report unusual activity for troubleshooting and system integrity purposes.
Maintains a smooth system power up and power down.
Simplifies printed circuit board layouts.
Automotive requirement maintains site and change control.
Applications
Relay Driver
LED Driver.
Stepper Motor Driver
End Products
Automotive Body Control Unit
Automotive Engine Control Unit