Infineon, Brushless Motor Driver IC 38-Pin, TSSOP
- RS-stocknr.:
- 226-6142
- Fabrikantnummer:
- IMC101TT038XUMA1
- Fabrikant:
- Infineon
Subtotaal (1 rol van 3000 eenheden)*
€ 6.336,00
(excl. BTW)
€ 7.668,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 2,112 | € 6.336,00 |
*prijsindicatie
- RS-stocknr.:
- 226-6142
- Fabrikantnummer:
- IMC101TT038XUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Pin Count | 38 | |
| Output Current | 50mA | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.5V | |
| Typical Switching Frequency | 40kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 115°C | |
| Length | 9.7mm | |
| Series | IMC101TT03 | |
| Standards/Approvals | RoHS | |
| Height | 1.1mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Pin Count 38 | ||
Output Current 50mA | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.5V | ||
Typical Switching Frequency 40kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 115°C | ||
Length 9.7mm | ||
Series IMC101TT03 | ||
Standards/Approvals RoHS | ||
Height 1.1mm | ||
Automotive Standard No | ||
The Infineon IMC100 is a family of highly integrated ICs for the control of variable speed drives. By integrating both the required hardware and software to perform control of a permanent magnet synchronous motor (PMSM) they provide the shortest time to market for any motor system at the lowest system and development cost. It is flexible host interface options for motor control commands such as UART, PWM or analog input signal.
Current sensing via single or leg shunt
Sensorless operation
Optional support for hall sensors (analog or digital)
Optional boost or totem pole PFC control integrated