Infineon, Brushless Motor Driver IC 38-Pin, TSSOP
- RS-stocknr.:
- 226-6143P
- Fabrikantnummer:
- IMC101TT038XUMA1
- Fabrikant:
- Infineon
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 202,90
(excl. BTW)
€ 245,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 790 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 120 | € 4,058 |
| 125 - 245 | € 3,788 |
| 250 - 495 | € 3,556 |
| 500 + | € 3,286 |
*prijsindicatie
- RS-stocknr.:
- 226-6143P
- Fabrikantnummer:
- IMC101TT038XUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | Motor Driver IC | |
| Motor Type | Brushless | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Pin Count | 38 | |
| Output Current | 50mA | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 40kHz | |
| Maximum Operating Temperature | 115°C | |
| Height | 1.1mm | |
| Length | 9.7mm | |
| Width | 6.4mm | |
| Standards/Approvals | RoHS | |
| Series | IMC101TT03 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type Motor Driver IC | ||
Motor Type Brushless | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Pin Count 38 | ||
Output Current 50mA | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 40kHz | ||
Maximum Operating Temperature 115°C | ||
Height 1.1mm | ||
Length 9.7mm | ||
Width 6.4mm | ||
Standards/Approvals RoHS | ||
Series IMC101TT03 | ||
Automotive Standard No | ||
The Infineon IMC100 is a family of highly integrated ICs for the control of variable speed drives. By integrating both the required hardware and software to perform control of a permanent magnet synchronous motor (PMSM) they provide the shortest time to market for any motor system at the lowest system and development cost. It is flexible host interface options for motor control commands such as UART, PWM or analog input signal.
Current sensing via single or leg shunt
Sensorless operation
Optional support for hall sensors (analog or digital)
Optional boost or totem pole PFC control integrated