Infineon, DC Motor Motor Driver IC 48-Pin, VQFN-48
- RS-stocknr.:
- 233-4403
- Fabrikantnummer:
- TLE95603QXXUMA1
- Fabrikant:
- Infineon
Subtotaal (1 rol van 2500 eenheden)*
€ 3.720,00
(excl. BTW)
€ 4.500,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2.500 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 1,488 | € 3.720,00 |
*prijsindicatie
- RS-stocknr.:
- 233-4403
- Fabrikantnummer:
- TLE95603QXXUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | Single | |
| Mount Type | Surface | |
| Package Type | VQFN-48 | |
| Output Current | 250mA | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | -0.3V | |
| Typical Switching Frequency | 25kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 6.8mm | |
| Height | 0.9mm | |
| Standards/Approvals | RoHS | |
| Series | TLE95603QXXU | |
| Automotive Standard | AEC-Q101 | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration Single | ||
Mount Type Surface | ||
Package Type VQFN-48 | ||
Output Current 250mA | ||
Pin Count 48 | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage -0.3V | ||
Typical Switching Frequency 25kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 6.8mm | ||
Height 0.9mm | ||
Standards/Approvals RoHS | ||
Series TLE95603QXXU | ||
Automotive Standard AEC-Q101 | ||
The Infineon TLE9560-3QX is a multifunctional system IC with integrated power supply, communication interfaces, multiple half-bridges and support features in an exposed pad PG-VQFN-48 power package. The device is designed for various motor control automotive applications. To support these applications, the DC Motor System IC provides the main functions, such as a 5V low-dropout voltage regulator one HS-CAN transceiver supporting CAN FD, four half-bridges for DC motor control, and one 32 bit serial peripheral interface (SPI).
Very low quiescent current consumption in Stop Mode and Sleep Mode
Periodic cyclic sense and cyclic wake in Normal Mode, Stop Mode and Sleep Mode
Reset and interrupt output
Drain-source monitoring and open-load detection
Configurable time-out and window watchdog
Over temperature and short circuit protection features