Infineon 6EDL7141XUMA1, Brushless Motor Driver IC, 7 V 48-Pin, PG-VQFN-48
- RS-stocknr.:
- 248-6191
- Fabrikantnummer:
- 6EDL7141XUMA1
- Fabrikant:
- Infineon
Subtotaal (1 eenheid)*
€ 3,34
(excl. BTW)
€ 4,04
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 3,34 |
*prijsindicatie
- RS-stocknr.:
- 248-6191
- Fabrikantnummer:
- 6EDL7141XUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | 3 Phase | |
| Maximum Collector Emitter Voltage Vceo | 7V | |
| Mount Type | Surface | |
| Package Type | PG-VQFN-48 | |
| Output Current | 1.5A | |
| Pin Count | 48 | |
| Minimum Supply Voltage | 5.5V | |
| Maximum Supply Voltage | 60V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 7mm | |
| Height | 0.9mm | |
| Standards/Approvals | RoHS | |
| Series | 6EDL7141 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration 3 Phase | ||
Maximum Collector Emitter Voltage Vceo 7V | ||
Mount Type Surface | ||
Package Type PG-VQFN-48 | ||
Output Current 1.5A | ||
Pin Count 48 | ||
Minimum Supply Voltage 5.5V | ||
Maximum Supply Voltage 60V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 7mm | ||
Height 0.9mm | ||
Standards/Approvals RoHS | ||
Series 6EDL7141 | ||
Automotive Standard No | ||
The Infineon 3-phase motor control gate driver IC that enables the development of high-performance battery-operated products using BLDC or PMSM motors, with an operating voltage from 5.5-60 V and configurable gate drive sink and source current up to 1.5 A, it has an adjustable gate driver supply voltage setting between 7 V, 10 V, 12 V and 15 V even at low battery voltage thanks to built-in dual charge pumps also has adjustable gate driver parameters to enable control of the slew rate to minimize system EMI.
Independently programmable high side/low side slew rate control
Independently programmable dead time for turn on/off switching
Control using 3PWM or 6PWM inputs up to 200 kHz
Built-in commutation tables for using 1PWM with or without hall sensors