ROHM, Brushed DC Motor Motor Driver IC 8-Pin, HTSOP-J8
- RS-stocknr.:
- 255-7667P
- Fabrikantnummer:
- BD62130AEFJ-E2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 80,00
(excl. BTW)
€ 97,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 2.464 stuk(s) vanaf 12 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 98 | € 1,60 |
| 100 - 248 | € 1,235 |
| 250 - 998 | € 1,21 |
| 1000 + | € 1,015 |
*prijsindicatie
- RS-stocknr.:
- 255-7667P
- Fabrikantnummer:
- BD62130AEFJ-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | HTSOP-J8 | |
| Output Current | 3A | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 36V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 6mm | |
| Height | 1mm | |
| Standards/Approvals | RoHS | |
| Width | 4.9mm | |
| Series | BD62130AEFJ | |
| Automotive Standard | No | |
| Supply Current | 1.4mA | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type HTSOP-J8 | ||
Output Current 3A | ||
Pin Count 8 | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 36V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Length 6mm | ||
Height 1mm | ||
Standards/Approvals RoHS | ||
Width 4.9mm | ||
Series BD62130AEFJ | ||
Automotive Standard No | ||
Supply Current 1.4mA | ||
The ROHM DC brush motor driver is a built-in 1 channel H bridge motor driver for DC brush motors. This driver can drive high efficiency by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation contributes to set high reliability.
Single power supply input (rated voltage of 36 V)
Rated output current (peak): 3.0 A (4.0 A)
Low ON-resistance DMOS output
Direct PWM control
Drive DC brush motor
Built-in logic input pull-down resistor
Cross-conduction prevention circuit
Thermal Shutdown