Schneider Electric LUC DOL Starter, DOL, 690V ac, 3 kW, 3 Phase, IP40

RS-stocknr.:: 272-599
Fabrikantnummer:: LUCA05B
Fabrikant:: Schneider Electric

Schneider Electric LUC DOL Starter, DOL, 690V ac, 3 kW, 3 Phase, IP40

Subtotaal (1 eenheid)*

€ 74,59

(excl. BTW)

€ 90,25

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 09 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 74,59

*prijsindicatie

RS-stocknr.:: 272-599
Fabrikantnummer:: LUCA05B
Fabrikant:: Schneider Electric

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schneider Electric
	Product Type	DOL Starter
	Power Rating	3kW
	Sub Type	DOL
	Number of Phases	3
	Current Rating	1.25, 5A
	IP Rating	IP40
	Number of Poles	3
	Overall Length	66mm
	Maximum Voltage	690V ac
	Standards/Approvals	ATEX, ASEFA, CCC, CSA C22.2 No. 60947-4-1, CSA, CE, UL 60947-4-1, UL, IEC 60947-6-2, EN 60947-6-2, EAC
	Overall Width	45mm
	Hazardous Area Certification	No
	Overall Depth	60mm
	Series	LUC

	Alles selecteren
	Merk Schneider Electric
	Product Type DOL Starter
	Power Rating 3kW
	Sub Type DOL
	Number of Phases 3
	Current Rating 1.25, 5A
	IP Rating IP40
	Number of Poles 3
	Overall Length 66mm
	Maximum Voltage 690V ac
	Standards/Approvals ATEX, ASEFA, CCC, CSA C22.2 No. 60947-4-1, CSA, CE, UL 60947-4-1, UL, IEC 60947-6-2, EN 60947-6-2, EAC
	Overall Width 45mm
	Hazardous Area Certification No
	Overall Depth 60mm
	Series LUC

Vrijgesteld

Standard Control Units

Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit.

Protection against overloads and short-circuits

Protection against phase failure and phase imbalance

Protection against insulation breaks (equipment protection only)

Manual reset

Class 10 for 3-phase motors

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed

Quicker panel build with faster assembly time and fewer wires per starter

Space saving 45mm width up to 32A (even for reversing) allowing smaller panels

Flexible and upgradeable with plug-and-play function modules

Voltage and protection parameters can be determined after assembly and wiring

Broad band electronic control unit provides improved overload protection with fewer components

Expandable plug-and–play diagnostics

Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.

Then choose the plug-in protection module by motor full load current and control voltage required.

Additional plug in functions can be selected and added at any time.

The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Note

'For use with' refers to a compatible power base in amps.

Warning

Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.