Gossen Metrawatt METRAHit CAL Multi-Function Calibrator, 20 mA, 999.9mV 45 mm 200 mm 75mm

RS-stocknr.:: 484-057
Fabrikantnummer:: M244A
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt METRAHit CAL Multi-Function Calibrator, 20 mA, 999.9mV 45 mm 200 mm 75mm

Subtotaal (1 eenheid)*

€ 1.674,18

(excl. BTW)

€ 2.025,76

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 8 stuk(s) vanaf 15 juni 2026
Plus verzending 2 stuk(s) vanaf 20 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.674,18

*prijsindicatie

RS-stocknr.:: 484-057
Fabrikantnummer:: M244A
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Maximum Voltage Measurement	999.9mV
	Product Type	Multi-Function Calibrator
	Accuracy	±1 %
	Port Connections	USB
	Battery Life	100h
	Maximum Current Measurement	20mA
	Battery Type	AA
	Power Source	Battery
	Safety Category Level	CAT IV, CAT III
	Safety Category Voltage	1000V
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Weight	750g
	Hazardous Area Certification	No
	Standards/Approvals	CE, ANSI/ESD S20.20:2014, BS EN 6134051:2007
	Height	45mm
	Width	75mm
	Length	200mm
	Model Number	METRAHit CAL
	Resolution	0.1 s

	Alles selecteren
	Merk Gossen Metrawatt
	Maximum Voltage Measurement 999.9mV
	Product Type Multi-Function Calibrator
	Accuracy ±1 %
	Port Connections USB
	Battery Life 100h
	Maximum Current Measurement 20mA
	Battery Type AA
	Power Source Battery
	Safety Category Level CAT IV, CAT III
	Safety Category Voltage 1000V
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Weight 750g
	Hazardous Area Certification No
	Standards/Approvals CE, ANSI/ESD S20.20:2014, BS EN 6134051:2007
	Height 45mm
	Width 75mm
	Length 200mm
	Model Number METRAHit CAL
	Resolution 0.1 s

Land van herkomst:: DE

Gossen Metrawatt Multi Function Calibrator

The Gossen Metrawatt METRAHIT multifunction calibrator has a highly accurate calibration and simulation instrument for electrical quantities.

As a handheld instrument, it is suitable for precise, onsite calibration and inspection tasks, as well as for test department and laboratory work. It allows the process engineer to simulate sensor conditions at the input of a transmitter while simultaneously measuring and storing the resulting signal output. Integral memory allows popular calibration procedures to be stored for transmitter testing in the field and calibration reports to be generated later.

Features and Benefits

0mA to 24mA source and 0mA to 300mA measure

0mA to 20mA and 4mA to 20mA preset ranges

Voltage output 0mV to 300mV, 3, 10 and 15V

Resistance simulated with 2 and 4 wire

Low resistance measurement of 0.01mΩ resolution

High resistance measurement up to 30MΩ

Simulation of RTD temperature sensors

Simulate extensive range of thermocouples with internal or external cold junction compensation

Frequency square wave pulse generator

Set calibration sequences including both, ramp and step functions with dwell periods

Ramp, step and dwell functions can be set with 1 second to 60 minutes intervals

Supplied with test leads/clips and protective holster with integral stand

Universal calibrator, simulator mA, mV ... V, 5 ...2000 Ω, degrees-C / degrees-F Pt100 / 1000, Ni100 / 1000,

Thermocouples range J, L, T, U, K, E, S, R, B, N

Applications

Process control automation

Manufacturing

Instrumentation

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007