Fluke Multifunction Tester 1 kV, 50V Earth Resistance Measurement With USB, RSCAL
- RS-stocknr.:
- 647-544
- Fabrikantnummer:
- FLUKE-1673FC UK/FPC
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 2.595,06
(excl. BTW)
€ 3.140,02
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2.595,06 |
*prijsindicatie
- RS-stocknr.:
- 647-544
- Fabrikantnummer:
- FLUKE-1673FC UK/FPC
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | 2 Wire, 3 Wire, Phase to Earth, Phase to Neutral | |
| Automatic RCD Test | Yes | |
| RCD Ramp Test | Yes | |
| Non-Tripping | Yes | |
| Insulation Test Voltage | 1kV, 50kV | |
| Maximum Voltage Measurement | 600V | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 1mA | |
| Width | 141.9mm | |
| Standards/Approvals | IEC 610102034, IEC/EN 610101, IEC 610102030 | |
| Height | 119.3mm | |
| Weight | 1.6kg | |
| Length | 2.625km | |
| Remote Switch Mode | Yes | |
| IP Rating | IP40 | |
| Safety Category Voltage | 600V | |
| Battery Type | Lithium-ion | |
| Power Source | Lithium-ion Battery | |
| Safety Category Level | CAT III 600 V CAT IV 300 V | |
| Display Type | Touch Screen | |
| Calibrated | RSCAL | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type 2 Wire, 3 Wire, Phase to Earth, Phase to Neutral | ||
Automatic RCD Test Yes | ||
RCD Ramp Test Yes | ||
Non-Tripping Yes | ||
Insulation Test Voltage 1kV, 50kV | ||
Maximum Voltage Measurement 600V | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 1mA | ||
Width 141.9mm | ||
Standards/Approvals IEC 610102034, IEC/EN 610101, IEC 610102030 | ||
Height 119.3mm | ||
Weight 1.6kg | ||
Length 2.625km | ||
Remote Switch Mode Yes | ||
IP Rating IP40 | ||
Safety Category Voltage 600V | ||
Battery Type Lithium-ion | ||
Power Source Lithium-ion Battery | ||
Safety Category Level CAT III 600 V CAT IV 300 V | ||
Display Type Touch Screen | ||
Calibrated RSCAL | ||
Vrijgesteld
- Land van herkomst:
- RO
Fluke Multifunction Tester, 600V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLUKE-1673FC UK/FPC
This multifunction tester is a portable instrument for electrical installation verification, designed to assess insulation, continuity, loop impedance and earth resistance in live and isolated systems. It operates from a rechargeable lithium‑ion battery and features a touch‑screen interface for interactive measurement selection. The unit supports data transfer via USB and conforms to recognised IEC safety standards for professional on‑site testing.
Features and Benefits:
• Insulation test voltages 1000V and 50V for varied insulation checks
• Continuity at 1mA for testing sensitive protective devices
• Loop impedance measurements 2‑wire, 3‑wire, phase to earth for fault localisation
• RCD ramp test and automatic RCD test for precise trip characterisation
• Maximum voltage measurement up to 600V for system verification
• Safety category CAT III 600V and CAT IV 300V for high‑voltage environments
• Continuity at 1mA for testing sensitive protective devices
• Loop impedance measurements 2‑wire, 3‑wire, phase to earth for fault localisation
• RCD ramp test and automatic RCD test for precise trip characterisation
• Maximum voltage measurement up to 600V for system verification
• Safety category CAT III 600V and CAT IV 300V for high‑voltage environments
Applications
• Suitable for domestic and commercial installation verification routines
• Ideal for RCD performance assessment and commissioning tests
• Used for periodic inspection regimes requiring insulation testing
• Can be used for fault finding with loop impedance and continuity checks
• Used with portable datalogging systems via USB download capability
• Ideal for RCD performance assessment and commissioning tests
• Used for periodic inspection regimes requiring insulation testing
• Can be used for fault finding with loop impedance and continuity checks
• Used with portable datalogging systems via USB download capability
How is the instrument powered and how long is field runtime?
It runs from an internal lithium‑ion battery which supports multiple sequential tests and can be recharged between site visits.
Which protection ratings and standards apply to the unit?
The instrument meets the IEC 61010 family of standards and carries an IP40 ingress rating for controlled indoor use.
Can the tester record and export measurement data?
Yes, measured results are downloadable over a USB interface for reporting and archiving.
Does the tester prevent nuisance tripping during tests?
It includes a non‑tripping continuity mode to verify continuity without actuating RCDs or protective devices.
Gerelateerde Links
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, RSCAL
- Fluke Multifunction Tester 1000V ISOCAL
- Fluke Multifunction Tester 1000V DKDCAL
- Fluke Multifunction Tester 1000V UKAS
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke Multifunction Tester 1000V RSCAL
- Fluke 1673 FC + TruTest Software Multifunction Tester 1000V Earth Resistance Measurement With USB, RSCAL
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, UKAS