87V, i410, L215 Multimeter Kit With UKAS Calibration

When you need to take electrical measurements in tricky spots, reach for this FLUKE multimeter kit. The AC/DC multimeter measures volts and amps and has a wide operating temperature range between -200°C and +1090°C, so it can take the heat in harsh settings. It also has a current clamp, probe light and probe extenders you can use for testing at a distance and in hard-to-reach areas. Better still, it comes with a soft foldable pouch so you can easily keep all your instruments together and get measuring while on the go.

• Maximum operating humidity of 90% RH for use in areas with high levels of water vapour
• Drop-tested from 1m, so it can take a knock
• Compact dimensions of 3.1 (H) x 8.6 (W) x 18.6cm (L) for easy handling and portability
• Overvoltage category III rating for extra electrical safety

• Resistance and continuity measurement
• Power cable maintenance
• Battery tests

Yes, you can. The versatile multimeter in this kit measures resistance between 0.1Ω and 50MΩ.

Additional Features

• Dual display resolution – 6,000 counts (3-3/4 digits) or 20,000 counts (4-1/2 digits)

• True RMS AC voltage and current for accurate measurements on non-linear signals

• Selectable filter for accurate voltage and frequency measurements on motor drives

• 0.05% DC accuracy

• 4-1/2 digit mode for precise measurements (20,000 counts)

• Measure up to 1000 VAC and DC

• Measure up to 10 A, 20 A for up to 30 seconds

• Frequency to 200 kHz and % duty cycle

• Resistance, continuity and diode test

• 10,000 μF capacitance range for components and motor caps

• Min/Max-Average recording with Min/Max Alert to capture variations automatically

• Relative mode to remove test lead interference

• Auto and manual ranging for maximum flexibility

• Touch Hold to capture stable readings avoiding noisy signals

• Analogue bargraph for fast changing or unstable signals

• Input Alert provides audible warning against wrong use of input jacks

Correctly measure pulse-width modulated motor drive signals

The Fluke 87V digital multimeter takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.

Does it have auto turn off if left on?

Yes - Automatic power down if left unused when switched on to preserve battery life

Fluke 87V/i410/L25 Includes 1 x 87V DMM and 1 x FREE i410 Current Clamp and 1 x FREE L215 SureGrip kit with probe light and Probe extenders