Niet beschikbaar
RS heeft dit product niet meer op voorraad.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Per stuk
€ 31,00
(excl. BTW)
€ 37,51
(incl. BTW)
- RS-stocknr.:
- 212-966
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Lead Type | Test Lead Kit | |
| Connector Type | Shrouded | |
| Fused | Yes | |
| Lead Length | 1.2m | |
| Safety Category Voltage | 600V | |
| Safety Category | CAT III 600 V | |
| Safety Category Level | CAT III | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Lead Type Test Lead Kit | ||
Connector Type Shrouded | ||
Fused Yes | ||
Lead Length 1.2m | ||
Safety Category Voltage 600V | ||
Safety Category CAT III 600 V | ||
Safety Category Level CAT III | ||
- Land van herkomst:
- GB
RS Fused Test Leads 600V CAT III
These 600V r.m.s. rated fused test leads meet the HSE GS38 safety recommendation.
A 500mA, 50kA breaking capacity fuse is fitted to provide protection against electrical arcing being sustained through the test leads
Probe tips are shrouded leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors
Double insulated silicon rubber cable indicates wear and damage to the leads via white inner layer of insulation
Safety crocodile clips with finger guards are available separately
Probe tips are shrouded leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors
Double insulated silicon rubber cable indicates wear and damage to the leads via white inner layer of insulation
Safety crocodile clips with finger guards are available separately
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets are also available
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets
Note
Although suitable for use with most multimeters this lead set is not recommended for use with Thurlby 1905, 1503, Thandar digital, Fluke 8010, 8050, Beckman DM25XL, DM93, DM98, AVO8, AVO2001 and ITT MX112 Multimeters.
Replacement fuses can be purchased please see RS Stock no. 161-1530
Standards
GS38