Hirschmann Test & Measurement 972337002 Test Probe Kit, CAT III, CAT II, 16A

Bekijk alle Multimeter Leads
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 25,29

(excl. BTW)

€ 30,60

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 4 stuk(s) vanaf 23 april 2026
  • Plus verzending 70 stuk(s) vanaf 23 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
1 - 9€ 25,29
10 - 24€ 23,42
25 +€ 21,51

*prijsindicatie

RS-stocknr.:
731-9395
Fabrikantnummer:
972337002
Fabrikant:
Hirschmann Test & Measurement
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Hirschmann Test & Measurement

Lead Type

Test Probe Kit

Product Type

Multimeter Leads

Current

16A

Connector Type

Spring Loaded Pin

Lead Length

1m

Safety Category Voltage

1000V

Minimum Operating Temperature

-15°C

Maximum Operating Temperature

70°C

Safety Category Level

CAT III, CAT II

Standards/Approvals

IEC 1010

Land van herkomst:
DE

Hirschmann Test & Measurement Multimeter Safety Probe Set


Brought to you by Hirschmann Test & Measurement, a safety test probe set conforming to IEC 1010 safety requirements. The sharp contact tips can penetrate the insulation and oxide layers and are protected by removable safety caps. Contact area also duals as a 4mm plug so they may be connected to any 4mm standard socket. Assemblies are 1 m long and cable is 1 mm² PVC. Rated to 1000V CAT II, a.c./16A. All models are highly reliable and excellent quality.

Features and Benefits


• Sharp probe tips for ease of use

• Durable and long lasting

• Connects to any 4 mm standard socket

• 1000 V CAT II

What are test leads?


These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?


Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.

What are the differences between safety categories?


For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

Standards

IEC 1010

Gerelateerde Links