RS PRO IDM71 Handheld Digital Multimeter True RMS - UKAS Calibrated

RS-stocknr.:: 123-3367
Fabrikant:: RS PRO

RS PRO IDM71 Handheld Digital Multimeter True RMS - UKAS Calibrated

Subtotaal (1 eenheid)*

€ 213,42

(excl. BTW)

€ 258,24

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

100 stuk(s) klaar voor verzending
Plus verzending 104 stuk(s) vanaf 13 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 213,42

*prijsindicatie

RS-stocknr.:: 123-3367
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Product Type	Multimeter
	Multimeter Type	Handheld
	Display Type	Digital
	Model Number	IDM71
	Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Resistance
	Maximum DC Voltage Measurement	1kV dc
	True RMS	Yes
	Maximum Frequency	60MHz
	Minimum Operating Temperature	0°C
	Battery Life	300h
	Maximum Operating Temperature	50°C
	Length	82mm
	Weight	400g
	Height	164mm
	Standards/Approvals	No
	Width	44mm
	Safety Category Level	CAT III, CAT IV
	Safety Category Voltage	1000V
	Battery Type	AAA 1.5 V, IEC LR03, AM4
	Calibrated	UKAS

	Alles selecteren
	Merk RS PRO
	Product Type Multimeter
	Multimeter Type Handheld
	Display Type Digital
	Model Number IDM71
	Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Resistance
	Maximum DC Voltage Measurement 1kV dc
	True RMS Yes
	Maximum Frequency 60MHz
	Minimum Operating Temperature 0°C
	Battery Life 300h
	Maximum Operating Temperature 50°C
	Length 82mm
	Weight 400g
	Height 164mm
	Standards/Approvals No
	Width 44mm
	Safety Category Level CAT III, CAT IV
	Safety Category Voltage 1000V
	Battery Type AAA 1.5 V, IEC LR03, AM4
	Calibrated UKAS

Manufacturer Information

Land van herkomst:: TW

RS PRO IDM71 Digital Multimeter

IDM71 are compact, rugged and high performing digital multimeters. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.

RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

Handy and compact housing

Large-scale display

6000 display count

DCA μA

Data Hold

Min / Max function

Frequency Counter

Capacitance Measurement

Auto Power Off

Shock resistant (1 m drop)

Protective Holster with tilt stand and lead storage

What does it measure?

DC and AC Voltages - up to 1000 V dc

DC and AC Current - up to 600μA

Resistance and continuity tester - up to 60 MΩ

Diode - open circuit voltage up to 3 V

Capacitance - range from 6 nF to 6 mF

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Slim Design

Ergonomically designed slim shape with one handed operating knob and buttons. It just fits into the palm of your hand.

RS-232 Optical Interface

The IDM73N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

What does it include?

Pair of Test Leads

Battery (Installed)

Protective Holster

User Manual

Typical Applications:

A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:

Electrical and electronic industries

Safety guidelines

When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?

The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.