Fluke 83 Digital Multimeter True RMS, UKAS Calibrated
- RS-stocknr.:
- 481-8170
- Artikelnummer Distrelec:
- 176-08-722
- Fabrikantnummer:
- FLUKE 83V
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 692,00
(excl. BTW)
€ 837,32
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 4 stuk(s) klaar voor verzending
- Plus verzending 5 stuk(s) vanaf 10 september 2026
- Plus verzending 7 stuk(s) vanaf 17 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 692,00 |
*prijsindicatie
- RS-stocknr.:
- 481-8170
- Artikelnummer Distrelec:
- 176-08-722
- Fabrikantnummer:
- FLUKE 83V
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Multimeter | |
| Multimeter Type | Digital | |
| Resistance Resolution | 100mΩ | |
| Model Number | 83 | |
| Display Type | Digital | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance, Temperature | |
| Maximum DC Voltage Measurement | 1kV dc | |
| True RMS | Yes | |
| DC Voltage Accuracy | ±0.1 % rdg + 1 Digits | |
| DC Current Accuracy | ±0.4 % rdg + 2 Digits | |
| AC Voltage Accuracy | ± 0.5 % + 2 | |
| AC Current Accuracy | ±1.2 % rdg + 2 Digits | |
| DC Voltage Resolution | 0.1 mV dc | |
| DC Current Resolution | 0.1μA dc | |
| AC Current Resolution | 0.1μA ac | |
| AC Voltage Resolution | 0.1mV ac | |
| Maximum Frequency | 20kHz | |
| Minimum Operating Temperature | -20°C | |
| Resistance Measurement Accuracy | ±1 % rdg + 3 Digits | |
| Battery Life | 400h | |
| Maximum Operating Temperature | 55°C | |
| Height | 31mm | |
| Weight | 355g | |
| Standards/Approvals | No | |
| Width | 86mm | |
| Length | 186mm | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000V | |
| Battery Type | Alkaline | |
| Calibrated | UKAS | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Multimeter | ||
Multimeter Type Digital | ||
Resistance Resolution 100mΩ | ||
Model Number 83 | ||
Display Type Digital | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance, Temperature | ||
Maximum DC Voltage Measurement 1kV dc | ||
True RMS Yes | ||
DC Voltage Accuracy ±0.1 % rdg + 1 Digits | ||
DC Current Accuracy ±0.4 % rdg + 2 Digits | ||
AC Voltage Accuracy ± 0.5 % + 2 | ||
AC Current Accuracy ±1.2 % rdg + 2 Digits | ||
DC Voltage Resolution 0.1 mV dc | ||
DC Current Resolution 0.1μA dc | ||
AC Current Resolution 0.1μA ac | ||
AC Voltage Resolution 0.1mV ac | ||
Maximum Frequency 20kHz | ||
Minimum Operating Temperature -20°C | ||
Resistance Measurement Accuracy ±1 % rdg + 3 Digits | ||
Battery Life 400h | ||
Maximum Operating Temperature 55°C | ||
Height 31mm | ||
Weight 355g | ||
Standards/Approvals No | ||
Width 86mm | ||
Length 186mm | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 1000V | ||
Battery Type Alkaline | ||
Calibrated UKAS | ||
- Land van herkomst:
- US
Fluke Multimeter, 400h Battery Life, True RMS Capability - FLUKE 83V
This multimeter is a handheld diagnostic instrument designed for professionals working in automation, electronics, electrical and mechanical environments. It measures AC and DC voltages and currents, resistance, continuity, capacitance, frequency and temperature, delivering measurements appropriate for field and workshop tasks while operating across typical industrial temperature and altitude ranges.
Features & Benefits
• True RMS measurement for accurate non‑sinusoidal readings improves waveform assessment
• DC voltage accuracy ±0.1%rdg+1 digit for precise low‑level sensing
• AC current accuracy ±1.2%rdg+2 digits for reliable alternating current checks
• Frequency response up to 20kHz for high‑frequency signal diagnostics
• Temperature and capacitance functions extend troubleshooting to thermal and component testing
• Battery life 400h with alkaline cells reduces service disruptions
• DC voltage accuracy ±0.1%rdg+1 digit for precise low‑level sensing
• AC current accuracy ±1.2%rdg+2 digits for reliable alternating current checks
• Frequency response up to 20kHz for high‑frequency signal diagnostics
• Temperature and capacitance functions extend troubleshooting to thermal and component testing
• Battery life 400h with alkaline cells reduces service disruptions
**Applications**
• Suitable for verifying motor drive outputs and inverter signals in automation systems
• Ideal for calibrating sensors and measuring low DC voltages in electronics labs
• Used for on‑site current checks and branch circuit verification in electrical maintenance
• Can be used for capacitor testing and component fault finding in mechanical control panels
• Used with temperature probes to troubleshoot thermal issues in assemblies
• Ideal for calibrating sensors and measuring low DC voltages in electronics labs
• Used for on‑site current checks and branch circuit verification in electrical maintenance
• Can be used for capacitor testing and component fault finding in mechanical control panels
• Used with temperature probes to troubleshoot thermal issues in assemblies
What display resolution and update behaviour can I expect for fast events?
The instrument provides a digital count of 6000 with updates around 4 times per second and an analogue 33‑segment bar updating at 40 times per second to help track transient changes.
How does the meter handle input protection and extreme inputs?
The input circuitry is protected for up to 1000V between terminals and earth, with fast fuses on current ranges to limit damage from overloads.
What environmental limits affect operation and storage?
It operates from −20°C to +55°C and is specified for use up to 2000m altitude, with storage capability from −40°C to +60°C.
How does the unit perform when measuring low currents and small conductance?
Microcurrent ranges include 600 μA and 6000 μA sensitivities with specific burden voltages and conductance resolution down to 0.01 nS for fine measurements.
Note
For Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %
Supplied with
TL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guide
Gerelateerde Links
- Fluke 83 Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 83 Digital Multimeter True RMS
- Fluke 179 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 175 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 177 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 27 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 28 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 289 Digital Multimeter True RMS, UKAS Calibrated