HellermannTyton Connectivity FWOA Series, Straight 2 Way SC Wall Outlet Wall Shielded Shield Type

The pre-terminated FWO is supplied with two SC SX APC adaptors and a 2 fibre G657.A2 10m cable (TIA colour code) which is terminated with a two SC APC connectors. The pre-terminated cable is fitted into the wall outlet and the cable is routed out of the bottom of the outlet.

The small single gang socket size enclosure can be discretely mounted on the wall up to 10m from the building entry providing the connection point for a router or other active equipment.

Fibre management features ensure a minimum bend radius of 30mm is maintained as the bare fibre is routed through the outlet and strain relief and anchor points secure the incoming cable.

The base has adjustable keyholes to allow for ease of positioning and installation and is supplied with a standard fixing kit.

Other FWO connector configurations and cable types are available on request.

1 x 10m G657.A2 B2Ca bare end to 2 x SC APC connector cable

TIA Colour Code

Cable entry through base

Install directly on the wall or onto a flush-mount back box

Quality surface finish

Tamper-proof latches

Positive fibre management to ensure a 30mm minimum bend radius