Fluke Networks LIQ-KIT-VFL-FBRLRT Network Tester RJ45, RJ11

RS-stocknr.:: 282-2368
Fabrikantnummer:: LIQ-KIT-VFL-FBRLRT
Fabrikant:: Fluke Networks

Fluke Networks LIQ-KIT-VFL-FBRLRT Network Tester RJ45, RJ11

Subtotaal (1 eenheid)*

€ 3.109,00

(excl. BTW)

€ 3.761,89

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 4 stuk(s) vanaf 04 juni 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 3.109,00

*prijsindicatie

RS-stocknr.:: 282-2368
Fabrikantnummer:: LIQ-KIT-VFL-FBRLRT
Fabrikant:: Fluke Networks

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke Networks
	Product Type	Network Cable Tester
	Equipment Type	Network Tester
	Connector Type	RJ45, RJ11
	Model Number	LIQ-KIT-VFL-FBRLRT
	Tone	Yes
	Power Source	Battery
	Battery Type	Lithium-ion
	Battery Life	8h
	Display Type	Capacitive Touch Display
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	45°C
	Length	8.5in
	Width	4.5in
	Standards/Approvals	IEEE 802.3
	Weight	624g
	Plug Type	RJ45

	Alles selecteren
	Merk Fluke Networks
	Product Type Network Cable Tester
	Equipment Type Network Tester
	Connector Type RJ45, RJ11
	Model Number LIQ-KIT-VFL-FBRLRT
	Tone Yes
	Power Source Battery
	Battery Type Lithium-ion
	Battery Life 8h
	Display Type Capacitive Touch Display
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 45°C
	Length 8.5in
	Width 4.5in
	Standards/Approvals IEEE 802.3
	Weight 624g
	Plug Type RJ45

Land van herkomst:: CN

Fluke Network Cable Tester, 8h Battery Life, 624g Weight - LIQ-KIT-VFL-FBRLRT

This network cable tester verifies copper cabling performance and diagnoses connectivity issues in Ethernet environments up to 10Gb/s. It combines cable qualification, wiremap and distance-to-fault measurements with Active network diagnostics and PoE assessment to support on-site installation and troubleshooting across industrial and commercial networks.

Features & Benefits

• Frequency-based bandwidth test indicates pass or fail up to 10Gb/s
• Length and fault location measurement identifies opens and shorts
• PoE load test measures delivered power and loaded voltage
• Nearest-switch diagnostics reveal switch name, IP and port number
• Stores up to 1000 test results for later documentation export
• USB-C charging and data transfer with rechargeable lithium-ion battery

Applications

• Suitable for commissioning 10GBASE-T and 5G/2.5G links in data centres
• Ideal for validating PoE availability for security cameras and APs
• Used for locating miswired or split pairs in structured cabling installs
• Can be used for network troubleshooting with ping and VLAN checks
• Suitable for technicians documenting site results via LinkWare PC

How long will a single charge last during typical field use?

The internal lithium-ion cell provides around 8 hours of operation under normal conditions.

Which connector types can be tested and located with tones?

The unit accepts and tones standard modular ports for RJ45 and RJ11 cabling.

How does the tester verify network-level connectivity?

It supports IPv4 and IPv6 ping tests, DHCP or static addressing, and reports response times Plus DNS and gateway reachability.

What environmental range is acceptable for field operation?

It is designed to operate between 0°C and 45°C and tolerate up to 90% relative humidity at lower temperatures.

How are test records exported for reporting?

Saved results are transferable via USB-C to LinkWare PC for PDF report generation.