1 Pole Panel Mount Non Fused Isolator Switch, 15 A

  • RS-stocknr. 416-714
  • Fabrikantnummer AF1X0038041F2D
  • Fabrikant Carlingswitch
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Single Pole, Hydraulically Damped

Insulation Resistance >100MΩ
The convenience of on/off switching and overcurrent protection in one package
Visual indication of breaker state via the unique, single shot moulded, two colour actuator rocker (black and red)
Temperature stable. Will not trip due to high ambient temperature levels
Trip free mechanism making it impossible to hold the breaker contacts closed during an overcurrent or short circuit fault
Low contact resistance (typically < 0·1Ω)
Terminal connections via 1/4in push-on receptacles
Mounting hole size: 32 x 19mm
Fixing holes: 4mm Ø 42mm centres
Full arc suppression allowing extended contact life
IEC Classification S/HM

Approvals

UL, CSA, VDE

Thermal Magnetic Convertible

All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms).

Specificaties
Kenmerk Waarde
Number of Poles 1
Maximum Current 15 A
Mounting Type Panel Mount
Voltage Rating 65 V dc, 250 V ac
Switch Rating 15 A
Length 54.76mm
Width 19.18mm
Depth 61.43mm
Terminal Type Push In
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
24,47
(excl. BTW)
29,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 24,47
10 - 24
€ 24,29
25 - 49
€ 22,48
50 - 99
€ 21,38
100 +
€ 18,79
Related Products
RS Pro high quality range of panel mount ...
Description:
RS Pro high quality range of panel mount switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. All switch ratings at AC22RoHS compliantMaximum panel thickness 3mmDepth behind panel 102min/117max mmDimensions 72(H)x50(W) mmActuator ...
For use on single-speed single direction motorsSheet steel ...
Description:
For use on single-speed single direction motorsSheet steel enclosures, ingress protection to IP65Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)Lockable in off position with up to three padlocksCover interlocked in ...
Adaptable with simple attachment of auxiliary contact, neutral ...
Description:
Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switchSuitable for main/emergency switching 690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3Supplied as complete kit in one pack.
The P1 series of switch-disconnectors with metal extension ...
Description:
The P1 series of switch-disconnectors with metal extension shafts are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switch from Eaton is suitable for use ...