Broadcom DC Input Optocoupler, Surface, 8-Pin Stretched SO-8 (SSO-8)
- RS-stocknr.:
- 178-3218
- Fabrikantnummer:
- ACPL-C797T-000E
- Fabrikant:
- Broadcom
Subtotaal (1 tube van 80 eenheden)*
€ 438,96
(excl. BTW)
€ 531,12
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 80 + | € 5,487 | € 438,96 |
*prijsindicatie
- RS-stocknr.:
- 178-3218
- Fabrikantnummer:
- ACPL-C797T-000E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Optocoupler | |
| Mount Type | Surface | |
| Maximum Forward Voltage | 6V | |
| Number of Channels | 1 | |
| Number of Pins | 8 | |
| Package Type | Stretched SO-8 (SSO-8) | |
| Input Current Type | DC | |
| Typical Rise Time | 5ns | |
| Maximum Input Current | 230mA | |
| Isolation Voltage | 5000Vrms | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | CSA Component Acceptance Notice 5, UL 1577, IEC/EN/DIN EN 60747-5-5 | |
| Typical Fall Time | 5ns | |
| Series | ACPL | |
| Automotive Standard | AEC-Q100 Grade 1 | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Optocoupler | ||
Mount Type Surface | ||
Maximum Forward Voltage 6V | ||
Number of Channels 1 | ||
Number of Pins 8 | ||
Package Type Stretched SO-8 (SSO-8) | ||
Input Current Type DC | ||
Typical Rise Time 5ns | ||
Maximum Input Current 230mA | ||
Isolation Voltage 5000Vrms | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals CSA Component Acceptance Notice 5, UL 1577, IEC/EN/DIN EN 60747-5-5 | ||
Typical Fall Time 5ns | ||
Series ACPL | ||
Automotive Standard AEC-Q100 Grade 1 | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is Ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Gerelateerde Links
- Broadcom ACPL-C797T-000E DC Input Optocoupler 8-Pin Stretched SO-8 (SSO-8)
- Broadcom Optocoupler 8-Pin Stretched SO-8
- Broadcom ACPL-K308U-000E Optocoupler 8-Pin Stretched SO-8
- Broadcom ACPL-K309T-000E DC Input Optocoupler 8-Pin SO Stretched
- Broadcom Optocoupler 6-Pin Stretched SO-6
- Broadcom ACPL-W345-000E Optocoupler 6-Pin Stretched SO-6
- Broadcom Optocoupler 5-Pin SO
- Broadcom Optocoupler 6-Pin SO