Keysight Technologies N2795A Oscilloscope Probe, Probe Type: Active 1GHz

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Keysight Single-ended Active Probes N2795A & N2796A

New generation of low-cost single-ended active probes with AutoProbe interface, compatible with Keysight's InfiniiVision and Infiniium families of oscilloscopes. These probes have the general-purpose, high-speed probing characteristics suitable for wide-ranging applications including digital system design, component design/characterization and educational research. The input resistance and low input capacitance provide ultra low loading of the DUT. This, together with superior signal fidelity, makes the probes useful for most digital logic voltages. Wide dynamic range and offset range enhance the breadth of application.

Input dynamic range -8V → +8V (DC or peak AC)
Non-destructive maximum input voltage -20V → +20V
Flatness (typical) 0.4dB (100kHz → 100MHz), 0.6dB (100MHz → 500MHz), 0.8dB (500kHz → 1GHz), 1.3dB (1GHz → 2GHz)
Equipped with white LED headlight to illuminate the circuit under test
Powered directly by the InfiniiVision and Infiniium AutoProbe interface, eliminating the need for an additional power supply
Cable length 1.3m

Note

Suitable for use with Agilent InfiniiVision 5000, 6000, 7000 (except 6000 100MHz) and Infiniium 9000, 90000, 90000 X-Series (with N5442A precision BNC adapter)

Supplied with

spring probe tip (2), rigid probe tip (2), flex nose clip adapter, copper pad 10x, Y-lead adapter 10cm, right angle ground 5cm, right angle ground 10cm, ground blade (2), offset ground, flex ground, colour coding rings (4), accessory card

Keysight Technologies Oscilloscope Probe

The Keysight Technologies N2890A active oscilloscope probe provides up to 1GHz bandwidth and features 1MΩ input resistance and extremely low input capacitance (1pF) provide ultra-low loading of the DUT. This accompanied with superior signal fidelity makes this probe useful for most of today’s digital logic voltages. This probe is equipped with a white LED headlight to illuminate the circuit under test. It is powered directly by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply.

Features and Benefits

• Bandwidth is DC to 1GHz (–3dB)
• Attenuation ratio is 10:1
• High resistance (1MΩ) and low capacitance (1 pF) input for low loading
• Input dynamic ranges between -8V and 8V
• Non-destructive Max input voltage ranges -20V and 20V
• Offset (typical) is <±1mV
• Includes various probe tip accessories
• Ambient operating temperature ranges between 0°C and 50 °C
• Flatness (typical) is 0.4dB (100kHz to 100MHz), 0.6dB (100MHz to 500MHz), 0.8dB (500kHz to 1GHz), 1.3dB (1GHz to 2GHz)

Supplied with

spring probe tip (2), rigid probe tip (2), flex nose clip adapter, copper pad 10x, Y-lead adapter 10cm, right angle ground 5cm, right angle ground 10cm, ground blade (2), offset ground, flex ground, colour coding rings (4), accessory card

Specificaties
Kenmerk Waarde
Probe Type Active
Attenuation 1:10
Bandwidth 1GHz
Model Number p N2795A
Series N
Rise Time 350ps
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.033,00
(excl. BTW)
1.249,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.033,00
Related Products
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
The TA300 is a 100 kHz bandwidth, single-range ...
Description:
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range ...
Solves three longstanding problems by providing: lower DUT ...
Description:
Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...