PicoScope 3000E Series, 3418E, 500 MHz PC Based Digital Oscilloscope, 4 Channels

RS-stocknr.:: 665-684
Fabrikantnummer:: PQ349
Fabrikant:: Pico Technology

PicoScope 3000E Series, 3418E, 500 MHz PC Based Digital Oscilloscope, 4 Channels

Bekijk alle Oscilloscopes

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 665-684
Fabrikantnummer:: PQ349
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Digital Oscilloscope
	Bandwidth	500MHz
	Number of Channels	4
	Model Number	3418E
	Oscilloscope Type	PC Based
	Oscilloscope Form	Pc Based
	Interface Type	USB Type C
	Series	PicoScope 3000E
	Depth	221mm
	Height	30mm
	Width	173mm
	Standards/Approvals	REACH, RoHS, WEEE
	Rise Time	925ps
	Waveform Refresh Rate	300000wfms/s
	Power Source	USB
	Plug Type	USB
	Maximum Time Base	5000s/div
	Vertical Resolution	8, 10 bit
	Minimum Vertical Sensitivity	1mV/div
	Maximum Vertical Sensitivity	4V/div
	Minimum Time Base	1ns/div

	Alles selecteren
	Merk Pico Technology
	Product Type Digital Oscilloscope
	Bandwidth 500MHz
	Number of Channels 4
	Model Number 3418E
	Oscilloscope Type PC Based
	Oscilloscope Form Pc Based
	Interface Type USB Type C
	Series PicoScope 3000E
	Depth 221mm
	Height 30mm
	Width 173mm
	Standards/Approvals REACH, RoHS, WEEE
	Rise Time 925ps
	Waveform Refresh Rate 300000wfms/s
	Power Source USB
	Plug Type USB
	Maximum Time Base 5000s/div
	Vertical Resolution 8, 10 bit
	Minimum Vertical Sensitivity 1mV/div
	Maximum Vertical Sensitivity 4V/div
	Minimum Time Base 1ns/div

Land van herkomst:: GB

PicoScope 3000E Series Digital Oscilloscope, 500MHz Bandwidth, 4 Channels - PQ349

This digital oscilloscope connects to a host PC via USB Type-C and is powered through the same Interface to capture and analyse electrical signals. It offers high-frequency signal observation with Rapid waveform acquisition and is intended for use in laboratory, development and troubleshooting environments where compact, PC-based measurement is required.

Features and Benefits:

• 500MHz bandwidth enables detailed high-frequency signal inspection
• 300000wfms/s refresh captures rare transient events quickly
• 10‑bit 8‑bit vertical resolution improves amplitude measurement fidelity
• 1ns/div to 5000s/div timebase supports very fast to very slow signals
• 925ps rise time reveals fast edge characteristics accurately

Applications

• Suitable for debugging high-speed digital circuits
• Ideal for power-supply ripple and transient analysis
• Used with multi-channel sensor arrays for synchronised capture
• Can be used for mixed-signal timing verification
• Used for long-duration signal monitoring and logging

How is the device powered during operation?

It draws power directly from the host via the USB Type-C connection.

What channel count is available for simultaneous measurements?

There are four independent input channels for concurrent signal capture.

What sensitivity range does the front end provide?

The vertical sensitivity spans from 1mV/div up to 4V/div for a wide dynamic range.

Which standards does the product comply with?

It meets REACH, RoHS and WEEE environmental standards.