1-480673-0 - TE Connectivity Female Connector Housing - Commercial MATE-N-LOK, 6.1mm Pitch, 9 Way, 3 Row

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

TE Connectivity 6.09mm .140 MATE-N-LOK Panel Mount Plug and Receptacle Housings, 9 Circuit Matrix

.140 MATE-N-LOK panel mount plug and receptacle housings with a 6.09mm centreline for large insulation diameters of up to 4.57mm and a and a 9 circuit matrix. .140 MATE-N-LOK panel mount plug housing (stock number 660-0943) accepts socket contacts (see stock number 720-2045 typically), .140 MATE-N-LOK panel mount receptacle housing (stock number 660-0946) accepts crimp pin contacts (see stock number 709-9802 typcially). These .140 MATE-N-LOK plug and receptacle housings are made from natural coloured UL94V-2 nylon, are fully polarized, have dual locking lances that provide contact stability and Positive Lock mating retention.

TE Connectivity .140 MATE-N-LOCK Housings

Internal equipment connection wire-to wire for discrete wire 6.09mm (.24 in) pitch,Contacts accept wire size range 20 - 10 AWG (.5 - 5 mm²)

Fully polarized nylon housings
Low insertion/extraction forces
Contacts fully protected in housing
For suitable contacts see typically stock no 660-0952 pin contact, 660-0978 socket contact

Specificaties
Kenmerk Waarde
Number of Contacts 9
Number of Rows 3
Pitch 6.1mm
Gender Female
Mounting Type Cable Mount
Series Commercial MATE-N-LOK
For Use With Connector
Body Orientation Straight
Width 23.11mm
Housing Material Nylon
1600 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 200)
0,855
(excl. BTW)
1,035
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
200 +
€ 0,855
€ 171,00
*prijsindicatie
Related Products
DF50 series 1.00mm pitch wire to board single ...
Description:
DF50 series 1.00mm pitch wire to board single and double row free hanging cable mount crimp socket housings. DF50 series crimp socket housings feature a positive locking latch mechanism that provides a tactile and audible click when the contacts are ...
Crimp socket housing with protrusions on a 1mm ...
Description:
Crimp socket housing with protrusions on a 1mm pitch, which accept pre-terminated crimped leads typical stock number 311-6647.,Mate with Top or Side entry headers typical stock numbers 515-1529 and 515-1490 respectively. Low mating forceLow profileTime and cost saving pre-terminated leadsPolarised ...
M40-110 Seies mates with M40-301 and M40-401 Series ...
Description:
M40-110 Seies mates with M40-301 and M40-401 Series headers typical stock number 681-3095M40-120 Seies mates with M40-302 Series headers typical stock number 681-0777.
Board to wire connector range, 1mm contact pitch,Low ...
Description:
Board to wire connector range, 1mm contact pitch,Low profile design with a mating height above the PCB of 5.8mm,Mechanism to prevent mis-insertion. • Contact pitch 1 mm• Electrical connection wipe• Beige Crimping Housing• Polyamide UL94V-0.