Stanley Pipe Bender For Use With Copper 12 to 22 mm
- RS-stocknr.:
- 562-039
- Fabrikantnummer:
- 0-70-452
- Fabrikant:
- Stanley
Subtotaal (1 eenheid)*
€ 105,62
(excl. BTW)
€ 127,80
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 105,62 |
*prijsindicatie
- RS-stocknr.:
- 562-039
- Fabrikantnummer:
- 0-70-452
- Fabrikant:
- Stanley
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Stanley | |
| Pipe Material | Copper | |
| Product Type | Pipe Bender | |
| Overall Length | 78.5mm | |
| Bend Angle | 90° | |
| Compatible Pipe Diameter | 12 to 22 mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Stanley | ||
Pipe Material Copper | ||
Product Type Pipe Bender | ||
Overall Length 78.5mm | ||
Bend Angle 90° | ||
Compatible Pipe Diameter 12 to 22 mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- TW
Stanley Pipe Bender, 78.5mm Overall Length, 90° Bend Angle - 0-70-452
This pipe bender is a handheld tool designed to form right-angled bends in copper tubing for plumbing and HVAC tasks. It operates manually to produce a 90° bend in copper pipes with diameters within a specific range, enabling accurate shaping on-site where controlled turning of tubing is required.
Features and Benefits:
• Works with copper tubing 12mm to 22mm for versatile sizing
• Produces 90° bends for consistent angular control
• Compact 78.5mm length for access in confined spaces
• Handheld format for single-operator tube shaping
• Produces 90° bends for consistent angular control
• Compact 78.5mm length for access in confined spaces
• Handheld format for single-operator tube shaping
Applications
• Suitable for bending domestic copper plumbing runs
• Ideal for forming HVAC refrigerant line bends
• Used with copper tubing during repair work on radiators
• Can be used for on-site pipe routing in tight areas
• Ideal for forming HVAC refrigerant line bends
• Used with copper tubing during repair work on radiators
• Can be used for on-site pipe routing in tight areas
What pipe materials can it shape?
It is intended solely for use with copper tubing and is optimised for that material’s ductility.
What pipe diameters are supported and how does that affect use?
It accommodates tubes from 12mm to 22mm so a range of common domestic and light-commercial sizes can be formed without additional adapters.
What angle can be achieved and how precise is it?
The tool produces a single 90° bend, providing repeatable right-angle shapes suitable for standard installation layouts.
How does its size influence application in restricted locations?
With an overall length of 78.5mm the tool is compact enough to access confined areas where larger benders cannot be manoeuvred.
Gerelateerde Links
- Stanley Pipe Bender For Use With Copper 6-10 mm
- Gedore Pipe Bender For Use With Copper 22 mm
- Virax Pipe Bender For Use With Annealed Copper 22 mm
- Facom Pipe Bender For Use With Annealed Copper 12 mm
- Virax Pipe Bender For Use With Annealed Copper 12 mm
- Stanley Pipe & Tube Cutter 22 mm Cuts Steel
- Bahco Pipe Bender 22 mm
- Virax Pipe Bender 22 mm