Georg Fischer PP Black Pipe Clamp, 0.63in x 1.22in x 1.06in, 0.24in

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: NL
Productomschrijving

KLIP-IT Pipe Support System

KLIP-IT pipe clip type.

For imperial and metric pipe systems
Black polyethylene clips
Black UV resistant polypropylene spacers
Clips can be mounted with or without spacers to give required height
Spacers and clips are connected by simple push fit
Clips 1 1/4 ", 1 1/2 ", 2", 40mm, 50mm and 63mm are fitted with a safety clip

//media.rs-online.com/t_line/L405576-12.gif
Specificaties
Kenmerk Waarde
Type Pipe Bracket
Pipe Diameter 16mm
Material PP
Fixing Hole Diameter 0.24in
Height 1.06in
Width 1.22in
Thickness 0.63in
Colour Black
17 op voorraad - levertijd is 1 werkdag(en)
Prijs 1 Bag of 10
15,73
(excl. BTW)
19,03
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 4
€ 15,73
€ 1,573
5 - 9
€ 15,25
€ 1,525
10 +
€ 14,77
€ 1,477
*prijsindicatie
Related Products
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...