INA GE30-FW-2RS-A 30mm Bore Plain Bearing, 55 mm OD, 353 kN
- RS-stocknr.:
- 191-3877
- Fabrikantnummer:
- GE30-FW-2RS-A
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 147,20
(excl. BTW)
€ 178,11
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 24 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 147,20 |
| 5 - 9 | € 141,32 |
| 10 - 24 | € 138,38 |
| 25 + | € 135,43 |
*prijsindicatie
- RS-stocknr.:
- 191-3877
- Fabrikantnummer:
- GE30-FW-2RS-A
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Plain Bearing | |
| Bore Diameter | 30mm | |
| Outside Diameter | 55mm | |
| Static Load Rating - Radial | 353kN | |
| Standards/Approvals | No | |
| Width | 32mm | |
| Series | GE | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Plain Bearing | ||
Bore Diameter 30mm | ||
Outside Diameter 55mm | ||
Static Load Rating - Radial 353kN | ||
Standards/Approvals No | ||
Width 32mm | ||
Series GE | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA GE30-PB 30mm Bore Plain Bearing 159 kN
- INA GE30-FO-2RS 30mm Bore Plain Bearing 357000 N
- INA GE30-DO-2RS 30mm Bore Plain Bearing 271000 N
- INA GE30-UK-2RS-A 30mm Bore Plain Bearing 275000 N
- INA GE35-DO-2RS 35mm Bore Plain Bearing 400 kN
- INA GE20-FW 20mm Bore Plain Bearing 128 kN
- INA GE30-AW-A 30mm Bore Spherical Bearing 75 mm OD
- INA GE40-FW-2RS-A 40mm Bore Plain Bearing 600000 N