Igus KGLM-08 8mm Bore Spherical Bearing, 1.2 kN, 19 mm OD, 2.7 kN
- RS-stocknr.:
- 488-4896
- Fabrikantnummer:
- KGLM-08
- Fabrikant:
- Igus
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 5,82
(excl. BTW)
€ 7,04
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 8 stuk(s) vanaf 10 augustus 2026
- Plus verzending 194 stuk(s) vanaf 10 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 5,82 |
| 5 - 9 | € 5,60 |
| 10 - 24 | € 5,44 |
| 25 + | € 5,36 |
*prijsindicatie
- RS-stocknr.:
- 488-4896
- Fabrikantnummer:
- KGLM-08
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Product Type | Spherical Bearing | |
| Bore Diameter | 8mm | |
| Outside Diameter | 19mm | |
| Static Load Rating - Radial | 2.7kN | |
| Material | Igumid G | |
| Static Load Rating - Axial | 1.2kN | |
| Series | igubal | |
| Standards/Approvals | No | |
| Width | 12mm | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Product Type Spherical Bearing | ||
Bore Diameter 8mm | ||
Outside Diameter 19mm | ||
Static Load Rating - Radial 2.7kN | ||
Material Igumid G | ||
Static Load Rating - Axial 1.2kN | ||
Series igubal | ||
Standards/Approvals No | ||
Width 12mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Igus DryLin W Series Linear Guide Carriage, 1.2N Static Load Rating, Die Cast Zinc Carriage - WJUM-01-10
This linear guide carriage provides compact, low-load linear motion for precision positioning in constrained assemblies. Designed for use where minimal bearing force is required, it combines a small footprint with a lightweight construction to support guided sliding movement in automation and electronics equipment.
Features and Benefits:
• Static load capacity 1.2N for delicate component movement
• Die-cast zinc body offering reduced mass and form stability
• Slider carriage form for straightforward linear guidance
• Compact carriage length 29mm enabling tight installation
• Narrow carriage width 26mm for space-saving layouts
• Die-cast zinc body offering reduced mass and form stability
• Slider carriage form for straightforward linear guidance
• Compact carriage length 29mm enabling tight installation
• Narrow carriage width 26mm for space-saving layouts
Applications
• Suitable for miniature actuator slides in automation rigs
• Ideal for PCB handling and pick-and-place tooling
• Used with small optical stages in electronics inspection
• Can be used for sensor positioning in electrical assemblies
• Ideal for PCB handling and pick-and-place tooling
• Used with small optical stages in electronics inspection
• Can be used for sensor positioning in electrical assemblies
What sort of load should I expect to move reliably with this component?
It is intended for very light-duty tasks and is rated to handle a static load of 1.2N, making it appropriate for small sensors, optics or light fittings.
What is the carriage construction and how does it affect mounting?
The carriage is formed from die-cast zinc, which reduces weight while providing a stable mounting surface compatible with compact support structures.
How does the carriage type influence integration into linear systems?
As a slider-style carriage, it provides a simple guided interface suited to applications requiring linear translation without complex mating hardware.
Can this unit serve as a direct replacement in tight assemblies?
Its compact 29mm length and 26mm width make it suitable for substitution where small dimensional envelopes are required and similar slider geometries are present.
Note
igubal® Spherical Bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
Gerelateerde Links
- Igus KGLM-10 10mm Bore Spherical Bearing 22 mm OD, 4 kN
- Igus KGLM-16 16mm Bore Spherical Bearing 32 mm OD, 8 kN
- Igus KGLM-12 12mm Bore Spherical Bearing 26 mm OD, 5.4 kN
- Igus KGLM-20 20mm Bore Spherical Bearing 40 mm OD, 10 kN
- Igus ECLM-20-08-HD 20mm Bore Spherical Bearing 36 mm OD, 3 kN
- SKF GE 8 E 8mm Bore Spherical Bearing 16 mm OD
- SKF GE 8 C 8mm Bore Spherical Bearing 16 mm OD
- Igus JSM-0814-08 8mm Bore Plain Bearing, 14 mm OD