SKF Plain Bush, 20 mm Shaft Diameter, 24 mm OD
- RS-stocknr.:
- 463-547
- Fabrikantnummer:
- PWM 202430
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 78,67
(excl. BTW)
€ 95,19
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 06 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 78,67 |
*prijsindicatie
- RS-stocknr.:
- 463-547
- Fabrikantnummer:
- PWM 202430
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Plain Bush | |
| Shaft Diameter | 20mm | |
| Outside Diameter | 24mm | |
| Material | Filament Wound | |
| Length | 30mm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Plain Bush | ||
Shaft Diameter 20mm | ||
Outside Diameter 24mm | ||
Material Filament Wound | ||
Length 30mm | ||
- Land van herkomst:
- DE
SKF Bush, 24mm Outside Diameter, 20mm Shaft Diameter - PWM 202430
This filament-wound bush is a cylindrical bearing sleeve designed to provide low-friction support for rotating shafts in industrial equipment. It serves as a replaceable Interface between a shaft and its housing, helping to reduce wear and compensate for misalignment in assemblies that require robust, maintenance-friendly bearings.
Features and Benefits:
• Filament-wound construction offers consistent material density and load distribution
• Suited to continuous operation with good wear resistance and dimensional stability
• Fits shafts with 20mm diameter to provide precise radial guidance
• Outside diameter engineered at 24mm for accurate housing fit
• 30mm axial length ensures adequate bearing surface for short-span supports
• Suited to continuous operation with good wear resistance and dimensional stability
• Fits shafts with 20mm diameter to provide precise radial guidance
• Outside diameter engineered at 24mm for accurate housing fit
• 30mm axial length ensures adequate bearing surface for short-span supports
Applications
• Suitable for linear actuators requiring Compact rotational support
• Ideal for conveyor rollers and light-duty rotating elements
• Used with electric motors where a replaceable sleeve is needed
• Can be used for automation linkages requiring low-maintenance bearings
• Ideal for conveyor rollers and light-duty rotating elements
• Used with electric motors where a replaceable sleeve is needed
• Can be used for automation linkages requiring low-maintenance bearings
What shaft clearance should I expect during installation?
The sleeve is intended to accept a nominal 20mm shaft, so installation clearance depends on shaft tolerance classes
tight-fit shafts improve concentricity while light interference can be used where press-fit retention is required.
How does the material respond to lubricated environments?
Filament-wound materials typically offer stable performance with boundary or light lubrication regimes, reducing friction and extending service life without the need for heavy greasing.
What housing considerations are important for correct seating?
The 24mm external diameter requires a closely matched bore, ensuring proper bore concentricity and perpendicularity minimises run-out and uneven wear.
Can it accommodate small misalignment between shaft and housing?
The construction provides limited conformity to correct slight shaft misalignment, reducing stress concentrations compared with rigid metallic sleeves.