RS PRO Opaque Fluoroplastics PTFE Rod, 500mm x 25mm Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

PTFE (Extruded)

Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance

Note

The PTFE sheets supplied have a size tolerance of ±5 mm

Standards

DIN 53479; DIN 53736; ASTM-D 1929

Specificaties
Kenmerk Waarde
Colour Opaque
Length 500mm
Material PTFE
Form Rod
Rod Diameter 25mm
Density 2.18 → 2.21g/cm³
Tensile Strength 25 MPa
Flammability Rating UL 94 V-0
Water Absorption 0.3%
Suitability Etching Plates & High Frequency Insulation, Pipe Lining, Pump Housing, Roller Covering, Slide Bearing & Runners
Hardness 30 Ball Indentation
Maximum Operating Temperature +260°C
Thermal Conductivity 0.25W/mK
Melting Point +327°C
Elongation 50%
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
78 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs 1 Lot of 1
27,70
(excl. BTW)
33,52
(incl. BTW)
Lot(s)
1 - 2
€ 27,70
3 - 5
€ 25,76
6 - 11
€ 24,38
12 +
€ 22,15
Related Products
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long ...
Description:
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long term to hot water (60°C)High storage stiff thermoplasticExcellent sliding properties/wear and abrasion resistantAcid, solvent and chemical resistantFor all bearing, bush, gear, insulator applicationsOpaque.
A laminate plastic based on a fine weave ...
Description:
A laminate plastic based on a fine weave high quality fabric. It combines excellent mechanicals strength and low water absorption with high electrical properties. Conforms to EN60893 type PF CC 305Various applications include fine pitched gears and other precision components. ...
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Typical frictional coefficient half that of other lubricated ...
Description:
Typical frictional coefficient half that of other lubricated nylonsHigh resistance to water absorbtionExcellent hardness, durability and creep resistance qualitiesFree cutting properties enable tight machining tolerancesSuitable for bearing, bush, roller and wheel applicationsGreen in colour.