Siemens SIWAREX U Series Monitoring Module for Use with S7-300 Series
- RS-stocknr.:
- 144-2578
- Fabrikantnummer:
- 7MH4950-2AA01
- Fabrikant:
- Siemens
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 144-2578
- Fabrikantnummer:
- 7MH4950-2AA01
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Accessory Type | Monitoring Module | |
| Product Type | Monitoring Module | |
| Series | SIWAREX U | |
| For Use With | S7-300 Series | |
| Hazardous Area Certification | EAC | |
| Standards/Approvals | UL | |
| Communication Protocol | I/O | |
| Supply Voltage | 24V | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
Accessory Type Monitoring Module | ||
Product Type Monitoring Module | ||
Series SIWAREX U | ||
For Use With S7-300 Series | ||
Hazardous Area Certification EAC | ||
Standards/Approvals UL | ||
Communication Protocol I/O | ||
Supply Voltage 24V | ||
- Land van herkomst:
- DE
Siemens Monitoring Module, 2 Analogue Inputs, 24V Voltage Category - SIWAREX U Series - 7MH4950-2AA01
Looking for a reliable measurement solution for your industrial weighing equipment? Turn to this monitoring module from Siemens. Thanks to a two-channel design, it's an efficient choice that you can connect with two sensors at once. For easy assembly, it's compatible with automated industrial systems from the S7-300 range. The built-in diagnostic system lets you carry out quick troubleshooting to improve its performance. This unit is resistant to shock and vibrations, so it's suitable for use with heavy-duty machinery. You can use it to monitor everything from the strength of crane loads on construction sites to the fill level of bunkers.
• High accuracy rating of 0.05% for reliability
• Monitors minimum and maximum limit values for versatility
• High 16-bit measurement resolution for clear signal transmissions
• Factory calibration enables quick adjustment of scale without adjustment weights
• DIN rail mounting for easy setup
How do I configure this module?
You can configure this module using the SIWATOOL U programme. For effective operation, this lets you set the measurement parameters of the scale, as well as the limit values.
Gerelateerde Links
- Siemens SIWAREX U Series Monitoring Module for Use with S7-300 Series
- Siemens SIWAREX FTA Series Monitoring Module for Use with S7-300 Series
- Siemens SIWAREX WT231 Series Analogue Module for Use with SIMATIC Series
- Siemens SIWAREX WP251 Series Analogue Module for Use with SIMATIC S7-1200
- Siemens SIWAREX WP241 Series Analogue Module for Use with SIMATIC S7-1200
- Siemens SIMATIC S7-300 Series Dummy Module for Use with SIMATIC S7-300 Module Exchange
- Siemens SIMATIC S7-300 Series Communication Module for Use with S7-300 Series
- Siemens SIMATIC S7-300 Series Input Relay Module for Use with S7-300 Series