Mitsubishi Electric PLC I/O Module for use with FX3U Series
- RS-stocknr.:
- 539-0954
- Fabrikantnummer:
- FX3U-64DP-M
- Fabrikant:
- Mitsubishi Electric
Subtotaal (1 eenheid)*
€ 679,73
(excl. BTW)
€ 822,47
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 5 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 679,73 |
*prijsindicatie
- RS-stocknr.:
- 539-0954
- Fabrikantnummer:
- FX3U-64DP-M
- Fabrikant:
- Mitsubishi Electric
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Mitsubishi Electric | |
| Product Type | PLC I/O Module | |
| For Use With | FX3U Series | |
| Standards/Approvals | cUL, UL, CE | |
| Depth | 87mm | |
| Width | 43mm | |
| Alles selecteren | ||
|---|---|---|
Merk Mitsubishi Electric | ||
Product Type PLC I/O Module | ||
For Use With FX3U Series | ||
Standards/Approvals cUL, UL, CE | ||
Depth 87mm | ||
Width 43mm | ||
Vrijgesteld
- Land van herkomst:
- JP
Network Modules
Two network communication modules for use with FX3U PLCs. These special function modules fit on to the right hand side of the base units and occupy 8 I/O points
The FX3U-64DP-M is a Profibus master module that allows you to integrate an FX3U PLC system as a class 1 master of a Profibus/DP network
This module provides comprehensive data and alarm processing to the Profibus/DP V1 standard and is easily setup with the GX Configurator DP software
The FX3U-ENET communications module provides the FX3U with direct connection on to an Ethernet network
With this module FX3U PLCs can exchange data quickly and easily with SCADA systems in addition to supporting program up/down load and monitoring
The module also supports peer-to-peer connection to other FX3U and Q Series PLC's
Interface: Profibus/DP with 9 pin D-Sub connector (stock no. 539-0954), and TCP/IP and UDP with RJ45 connector (stock no. 539-0960)
Mitsubishi FX3U
FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.
Note
Compatible with FX3U units only. Supply voltage is taken from PLC base unit.