BARTH lococube mini-PLC Series PLC I/O Module, Digital Output, 5-Input, Analogue Input
- RS-stocknr.:
- 122-1525
- Fabrikantnummer:
- 0850-0570
- Fabrikant:
- BARTH
Subtotaal (1 eenheid)*
€ 150,11
(excl. BTW)
€ 181,63
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 3 stuk(s) vanaf 10 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 150,11 |
*prijsindicatie
- RS-stocknr.:
- 122-1525
- Fabrikantnummer:
- 0850-0570
- Fabrikant:
- BARTH
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | BARTH | |
| Series | lococube mini-PLC | |
| Product Type | PLC I/O Module | |
| Number of Inputs | 5 | |
| Output Type | Digital | |
| Input Type | Analogue | |
| Number of Outputs | 5 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Length | 60mm | |
| Depth | 15mm | |
| Standards/Approvals | 2004/108/EC, 2004/108/EG, 2014/30/EU | |
| Width | 45mm | |
| Communication Port Type | CAN | |
| Battery Backup | Yes | |
| Supply Voltage | 32, 7V dc | |
| Number of Communication Ports | 3 | |
| Programming Language Used | miCon-L | |
| Output Current | 1.5A | |
| Display Included | Yes | |
| Mount Type | Panel Mount | |
| Alles selecteren | ||
|---|---|---|
Merk BARTH | ||
Series lococube mini-PLC | ||
Product Type PLC I/O Module | ||
Number of Inputs 5 | ||
Output Type Digital | ||
Input Type Analogue | ||
Number of Outputs 5 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Length 60mm | ||
Depth 15mm | ||
Standards/Approvals 2004/108/EC, 2004/108/EG, 2014/30/EU | ||
Width 45mm | ||
Communication Port Type CAN | ||
Battery Backup Yes | ||
Supply Voltage 32, 7V dc | ||
Number of Communication Ports 3 | ||
Programming Language Used miCon-L | ||
Output Current 1.5A | ||
Display Included Yes | ||
Mount Type Panel Mount | ||
- Land van herkomst:
- DE
BARTH Logic Module
The BARTH STG-570 CAN panel mount logic module is a highly integrated programmable logic controller. It provides an outstanding graphical programming capability at the lowest current consumption and small form factor. This logic module has low power consumption and can operate over a wide range of voltages, which makes it suitable for 12V and 24V battery-powered systems. The CAN bus allows the user to connect to a variety of network components to the Mini-PLC. It has 8 analogues inputs which can vary from 0VDC to 30VDC and 2 digital inputs up to 10Khz. This logic module has 8 power outputs up to 1.5A and 1PWM power output. This logic module can be easily programmed using miCon-L software, which does not require a difficult programming language.
Features and Benefits
Reliable solid-state output
Programmable status LED
Only 1 CAN Interface
TTL-232/USB connection to PC
Intuitive graphical programming capability
Wide operating voltage ranges between 7VDC and 32VDC
Ultra-flat housing
Height is 10mm
Vibration resistant and rugged sealing
Very low current consumption
Fail-safe oscillator
Applications
Industrial automation
Building automation
Automotive technology
Maritime technology
Gerelateerde Links
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-850 PWM
- BARTH lococube mini-PLC Series PLC CPU for Use with STG-950 Solid State Output Analogue, DC Digital
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-100 Analogue Output,
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-650 Digital Output,
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-700 Digital, Power Stepper
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-560 Digital Solid
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-580 Digital Solid
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-660 Digital Solid