Volkel M3 x 0.5 Ring Thread Gauge Ring Gauge, 0.5mm Pitch Diameter, PreCal
- RS-stocknr.:
- 189-3352
- Fabrikantnummer:
- 16332 +Cal
- Fabrikant:
- Volkel
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 189-3352
- Fabrikantnummer:
- 16332 +Cal
- Fabrikant:
- Volkel
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Volkel | |
| Plug/Ring | Ring | |
| Gauge Type | Ring Thread Gauge | |
| Go / No Go | No Go | |
| Thread Size | M3 x 0.5 | |
| Pitch Diameter | 0.5mm | |
| Tolerance | 6g | |
| Imperial or Metric | Metric | |
| Calibrated | PreCal | |
| Alles selecteren | ||
|---|---|---|
Merk Volkel | ||
Plug/Ring Ring | ||
Gauge Type Ring Thread Gauge | ||
Go / No Go No Go | ||
Thread Size M3 x 0.5 | ||
Pitch Diameter 0.5mm | ||
Tolerance 6g | ||
Imperial or Metric Metric | ||
Calibrated PreCal | ||
N.v.t.
- Land van herkomst:
- DE
The thread NO-GO ring gauge must not screw into the part by hand more than two threads (without using excessive force). If the ring gauge can be screwed into the thread by more than two threads, the thread does not meet the desired requirements (=scrap). The no-go thread gauges are marked in red. The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL using IAC thread scanners.
Gerelateerde Links
- Volkel M3 x 0.5 Ring Thread Gauge Ring Gauge PreCal
- Volkel M3 x 0.5 Ring Ring Gauge, 0.5 mm Pitch Diameter
- Volkel M3 x 0.5 Plug Thread Plug Gauge, 0.5 mm Pitch Diameter
- Volkel M12 x 1.75 Ring Ring Gauge, 1.75 mm Pitch Diameter
- Volkel M16 x 2 Ring Ring Gauge, 2 mm Pitch Diameter
- Volkel M14 x 2 Ring Ring Gauge, 2 mm Pitch Diameter
- Volkel M6 x 1 Ring Ring Gauge, 1 mm Pitch Diameter
- Volkel M5 x 0.8 Ring Ring Gauge, 0.8 mm Pitch Diameter