- RS-stocknr.:
- 666-8015
- Fabrikantnummer:
- 99.02.9.024.99
- Fabrikant:
- Finder
524 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
682 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 3,93
(excl. BTW)
€ 4,76
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 3,93 |
5 - 11 | € 3,85 |
12 + | € 3,69 |
- RS-stocknr.:
- 666-8015
- Fabrikantnummer:
- 99.02.9.024.99
- Fabrikant:
- Finder
Wetgeving en compliance
- Land van herkomst:
- IT
Productomschrijving
55 Series Relay Accessories
Finder 55 series relay accessories including sockets, coil indication and EMC suppression modules
Features and Benefits
Depending on module selected, they can provide;
Suppression of coil back emf on switch-off
LED indication to show when the coil in energized
Protection against reverse polarity applied across the coil terminals
By-pass of troublesome leakage currents in the coil circuit
Note
The colour of RS stock 666-7987 is Black
Finder Coil Indication and EMC Suppression Module - 99.02.9.024.99
Our Finder coil indication and EMC suppression module is used for a relay. The module features a green LED indicator and is predominantly used for DC (direct current) only.
Features & Benefits
Used in a multitude of applications, such as: Industrial, commercial, power management, consumer electronics and automation & process control
Green LED indicator
Recovery diode module with standard polarity - used for DC operation only
The reverse voltage peaks of the coil are short-circuited by the recovery diode (positive to terminal A1)
Considered a relay module accessory, forming part of the Finder 99 series
When the coil has power, the green LED indicator will light up
The release time increases by an approximate factor from three to five, If you do not want an increased release time, use an RC module or a Varistor
Compact design, allowing the user to use in a multitude of environments
For use with Finders 85 relay module series
White or black in colour
Has a voltage range of 6 V DC - 24 V DC
Green LED indicator
Recovery diode module with standard polarity - used for DC operation only
The reverse voltage peaks of the coil are short-circuited by the recovery diode (positive to terminal A1)
Considered a relay module accessory, forming part of the Finder 99 series
When the coil has power, the green LED indicator will light up
The release time increases by an approximate factor from three to five, If you do not want an increased release time, use an RC module or a Varistor
Compact design, allowing the user to use in a multitude of environments
For use with Finders 85 relay module series
White or black in colour
Has a voltage range of 6 V DC - 24 V DC
Specificaties
Kenmerk | Waarde |
---|---|
Accessory Type | LED Diode |
Series | 99 Series |