INA UCPA204-J7 Plummer Block House -, 20 mm ID
- RS-stocknr.:
- 191-4521
- Fabrikantnummer:
- UCPA204-J7
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 40,51
(excl. BTW)
€ 49,02
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 30 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 40,51 |
| 5 - 9 | € 38,90 |
| 10 - 24 | € 38,14 |
| 25 + | € 37,26 |
*prijsindicatie
- RS-stocknr.:
- 191-4521
- Fabrikantnummer:
- UCPA204-J7
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Inside Diameter | 20mm | |
| Product Type | Plummer Block House | |
| Material | Cast Iron | |
| Centre Height | 30.2mm | |
| Mount Hole Size | M10 | |
| Length | 76mm | |
| Depth | 31mm | |
| Mount Hole Centre-to-Centre | 52mm | |
| Height | 62mm | |
| Series | UCPA | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Inside Diameter 20mm | ||
Product Type Plummer Block House | ||
Material Cast Iron | ||
Centre Height 30.2mm | ||
Mount Hole Size M10 | ||
Length 76mm | ||
Depth 31mm | ||
Mount Hole Centre-to-Centre 52mm | ||
Height 62mm | ||
Series UCPA | ||
Standards/Approvals No | ||
Schaeffler UCPA Series Plummer Block House, 20mm Inside Diameter, 30.2mm Centre Height - UCPA204-J7
This plummer Block house is a bearing housing intended to support a rotating shaft within industrial assemblies. Constructed from cast iron, it provides a stable mounting Interface for a 20mm bore bearing and is suited to installations requiring a Compact housing form factor. The unit locates on a flat surface using two threaded fixing points and positions the bearing at a defined centre height for alignment with driven components.
Features and Benefits:
• Cast iron construction provides sturdy load distribution and durability
• M10 mount holes enable secure bolted attachment to mounting surfaces
• 52mm mount hole centre-to-centre assures consistent shaft alignment
• 31mm depth supports Compact axial positioning in confined spaces
• 62mm overall height simplifies integration with adjacent machine parts
• M10 mount holes enable secure bolted attachment to mounting surfaces
• 52mm mount hole centre-to-centre assures consistent shaft alignment
• 31mm depth supports Compact axial positioning in confined spaces
• 62mm overall height simplifies integration with adjacent machine parts
Applications
• Suitable for supporting small rotary shafts in conveyor assemblies
• Used with 20mm bore bearings in gearbox mounting frames
• Ideal for light to medium industrial drive line supports
• Can be used for retrofitting existing machinery with defined centre heights
• Used for shaft support where Compact housing depth is required
• Used with 20mm bore bearings in gearbox mounting frames
• Ideal for light to medium industrial drive line supports
• Can be used for retrofitting existing machinery with defined centre heights
• Used for shaft support where Compact housing depth is required
What material composes the housing and why is it chosen?
The housing is MADE from cast iron which provides mass and rigidity for load distribution.
What threaded fixing specification is provided for mounting?
Mounting uses M10 threaded holes to accept standard metric fasteners for secure installation.
How is shaft positioning ensured relative to the mounting plane?
The housing sets the bearing Axis at a 30.2mm centre height to establish consistent alignment.
Which bore size does the housing accommodate and how does that affect bearing selection?
The unit accepts an inside diameter of 20mm, so bearings with a 20mm bore are required for correct fit.
Gerelateerde Links
- INA UCPA208-J7 Plummer Block House -, 40 mm ID
- INA UCPA209-J7 Plummer Block House -, 45 mm ID
- INA UCPA205-J7 Plummer Block House -, 25 mm ID
- INA UCPA203-J7 Plummer Block House -, 18 mm ID
- INA UCPA210-J7 Plummer Block House -, 50 mm ID
- INA UCPA207-J7 Plummer Block House -, 35 mm ID
- INA UCPA206-J7 Plummer Block House -, 30 mm ID
- FAG UCP204-J7 Plummer Block House -, 20 mm ID
