SKF SNL 215 Plummer Block House -, 75 mm ID

RS-stocknr.:: 213-2015
Fabrikantnummer:: SNL 215
Fabrikant:: SKF

SKF SNL 215 Plummer Block House -, 75 mm ID

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 234,08

(excl. BTW)

€ 283,24

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 12 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 234,08

*prijsindicatie

RS-stocknr.:: 213-2015
Fabrikantnummer:: SNL 215
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Plummer Block House
	Inside Diameter	75mm
	Material	Cast Iron
	Centre Height	80mm
	Mount Hole Size	16 mm
	Length	280mm
	Depth	115mm
	Mount Hole Centre-to-Centre	230mm
	For Use With	Bearings with a Cylindrical Bore
	Number of Bolts	2
	Standards/Approvals	No
	Series	SNL 215 + 22215 SE
	Height	155mm

	Alles selecteren
	Merk SKF
	Product Type Plummer Block House
	Inside Diameter 75mm
	Material Cast Iron
	Centre Height 80mm
	Mount Hole Size 16 mm
	Length 280mm
	Depth 115mm
	Mount Hole Centre-to-Centre 230mm
	For Use With Bearings with a Cylindrical Bore
	Number of Bolts 2
	Standards/Approvals No
	Series SNL 215 + 22215 SE
	Height 155mm

Land van herkomst:: LT

SKF Plummer Block House, 102.5mm Bore Diameter, 130mm Seating Diameter - SNL 215

Get your industrial shaft spinning with this plummer block house from SKF. To get you moving in no time, installation is easy. There are two predrilled mount holes on the base so you can fasten the unit onto a flat surface. Then, simply insert a bearing into the housing and complete the setup by threading a shaft through the inner ring. As it’s made from strong cast iron, this is a reliably durable option that will hold up its end of the bargain in harsh conditions.

Features & Benefits

• Cast-iron housing is impact-resistant, so it can take plenty of knocks

• Can be relubricated with grease to support a long service life

• Comes with corrosion-protection paint for use in areas with high levels of water vapour

Applications

• Conveyor systems

• Heat treatment facilities

• Packaging industry

How much does this housing weigh?

This plummer block house weighs 7.09kg, so it's a heavyweight contender.

What bolts should I use to mount this plummer block house?

This plummer block house has bolt holes that you can use to mount it using two 16mm screws.